electricalroles.com.auJoin

How do you become an electrical engineer in Australia?

Short answer

You need an engineering degree accredited by Engineers Australia at professional engineer level, which gives you Washington Accord recognition. Then you build experience. After about five years you can go for Chartered status and for state registration such as RPEQ in Queensland or BLA registration in Victoria.

Checked against 9 sources

Three young electrical engineers smiling around a large drawing in a bright office with an orange wall
Entry
Washington Accord accredited degree
Chartered
EA member, 5+ years' experience
Registration
Required in Qld and Vic
Typical pay
About $137,100 a year (modelled)

What qualification do you need?

Start with a Bachelor of Engineering, or a Master of Engineering, in electrical or electrical and electronic engineering. What matters is that Engineers Australia accredits it at professional engineer level. Engineers Australia publishes its list of accredited programs, and electrical degrees at universities such as Adelaide University appear on the January 2026 list.

Accreditation is what makes your degree count elsewhere. Engineers Australia is a full signatory to the three International Engineering Alliance accords. The Washington Accord covers professional engineers, the Sydney Accord covers engineering technologists and the Dublin Accord covers engineering associates. If you want RPEQ or Victorian registration later, pick a program accredited under the Washington Accord.

Graduate years and specialisations

Your first few years after university are where you pick up the experience that registration and Chartered status depend on. Many graduates join a structured graduate program at a utility, consultancy, contractor or manufacturer. Others start in a smaller firm working under a senior engineer. Either way, keep a record of your projects and get a registered engineer to supervise and sign off your work.

Electrical engineering covers a lot of ground. Common paths include power systems and transmission, building services design, protection and control, renewables and grid connection, automation and instrumentation, and electronics. Find your area early. State registration is granted by area of engineering, and you need referees who have seen your work in that area.

Chartered status with Engineers Australia

Chartered is the top technical credential Engineers Australia offers. Before you can apply you must be a member and have at least five years of engineering experience. You also need to show competence across 16 elements, grouped under personal commitment, obligation to community, value in the workplace and technical proficiency.

Start getting ready in your first year. Join as a member, keep a log of your continuing professional development and keep evidence of where you used each competency element. That evidence can be project plans, drawings, reports or emails. If you have more than 15 years of experience, you can use a shorter process built around an interview.

Do you need state registration?

Queensland and Victoria both require it. In Queensland you must be a Registered Professional Engineer of Queensland (RPEQ) to provide professional engineering services in or for the state. The exceptions are working under the direct supervision of an RPEQ or working only to a prescriptive standard. The rule also covers engineers based interstate or overseas who work on Queensland projects.

Since 1 June 2023, electrical engineers in Victoria have had to register with the Business Licensing Authority. In NSW, you only need registration under the Design and Building Practitioners scheme for professional engineering work on regulated buildings. Electrical is one of the registration classes there. Western Australia's building engineer scheme covers civil, structural, mechanical and fire safety engineers. Electrical is not on that list.

Pay

Australia
$137,100
New South Wales
$138,000
Victoria
$135,200
Queensland
$135,600
South Australia
$129,400
Western Australia
$150,100
Tasmania
$121,200
Northern Territory
$141,000
Australian Capital Territory
$149,400

AUD a year, before tax. Based on Australian Bureau of Statistics Employee Earnings and Hours, May 2025, indexed to 2026 with a wage index. State figures are modelled. Specialisation, sector, seniority and registration move the figure. Refer to the Electrical Engineers salary guide for figures from live adverts.

What you need

  • Accredited degreeA Bachelor or Master of Engineering in electrical engineering, accredited by Engineers Australia at professional engineer level under the Washington Accord.
  • Engineers Australia membershipYou must be a member before you can apply for Chartered status. You also need at least five years of engineering experience.
  • RPEQ (Queensland)You need a Washington Accord degree or an equivalent, plus at least five years of relevant experience in the past ten. At least four of those years must be after you graduated.
  • BLA registration (Victoria)You need five years of full-time professional experience in your area within the last ten years, with at least four after graduation. An approved entity must assess you before you apply to the Business Licensing Authority.
  • DBP registration (NSW)This applies only to regulated building work. You need at least five years of experience in the last ten, including two years in Australia, and you must meet the insurance requirements.
  • Ongoing CPDChartered status and state registration both require you to keep up continuing professional development and keep records of it.

State by state

QueenslandYou must hold RPEQ to provide professional engineering services in or for Queensland, unless an RPEQ directly supervises you or you work only to a prescriptive standard. An approved assessment entity assesses you first, and then you apply to the Board of Professional Engineers of Queensland.
VictoriaSince 1 June 2023, electrical and electronics engineers must register with the Business Licensing Authority under the Professional Engineers Registration Act 2019. The rule also applies to interstate engineers working on Victorian projects.
New South WalesYou need registration under the Design and Building Practitioners Act 2020 for professional engineering work on regulated buildings, currently classes 2, 3 and 9c. Electrical is one of the registration classes. Unregistered engineers can work under the direct supervision of a registered engineer.
Western AustraliaThe building engineer registration scheme covers civil, structural, mechanical and fire safety engineers. Electrical engineering is not one of the registered areas.

How to get there

  1. Before uniPick an accredited degreeChoose an electrical engineering program on the Engineers Australia accredited list at professional engineer level (Washington Accord).
  2. During degreeStudy and get work experienceJoin Engineers Australia as a student member and look for vacation work or internships in the field you want to work in.
  3. Years 1-2Start as a graduateJoin a graduate program or a firm where registered engineers supervise and review your work.
  4. Years 1-5Build your evidenceLog your CPD and keep records of where you applied the 16 Chartered competency elements.
  5. Year 5+Get Chartered and registeredAfter five years of experience, with at least four after graduation, apply for Chartered status and for RPEQ or Victorian registration if you work in those states.

Open now on ElectricalRoles.com.au

See all →

Questions people ask

How long until I can become an RPEQ?

You need at least five years of relevant experience within the past ten years, and at least four of those years must be after graduation. Once the Board has a complete application, processing takes about two to three weeks.

Do I need to be Chartered to work as an electrical engineer?

No. Chartered is a voluntary credential from Engineers Australia. It does carry weight with employers, and it opens the way to registration through Engineers Australia. To apply you must be a member with at least five years of engineering experience.

Can I work in Queensland without RPEQ while I build experience?

Yes. You can provide professional engineering services if an RPEQ directly supervises you, or if you work only to a prescriptive standard. Most graduates work this way until they qualify.

I live in NSW but design for Victorian projects. Do I need Victorian registration?

Yes. Victoria's rule covers engineers who live in other states and work on Victorian projects. Without registration you need direct supervision by a registered engineer, or you must work only to a prescriptive standard.

Will an overseas engineering degree count?

If the degree is from a Washington Accord country and accredited there, it is generally recognised. If not, Engineers Australia can assess it for equivalence. For Victorian registration, engineers without a Washington Accord qualification first need an Entry to Practice (Stage 1) assessment.

Sources

  1. Engineers Australia: Accreditation
  2. Engineers Australia: Accredited programs January 2026
  3. Engineers Australia: Chartered
  4. Board of Professional Engineers of Queensland: Become a RPEQ
  5. Engineers Australia: Victoria engineer registration and assessment
  6. Engineers Australia: Get assessed for Victorian registration
  7. NSW Government: Professional engineer work, qualifications and experience
  8. NSW Fair Trading: Professional engineer obligations on regulated buildings
  9. Building and Energy WA: Building engineers registration

Electrical Engineers jobs by city

Let employers come to you

Upload your CV and we build your profile from it. Employers contact you. Free for job seekers.

Create your profile
Free email alerts

Be the first to know.

New electrical jobs, employers and talent, straight to you as they go live. Stay in the loop.

Get the inside track →