electricalroles.com.auJoin

What does an electrical estimator do in Australia?

Short answer

An electrical estimator works out what an electrical job will cost before anyone wins it. They count materials from the drawings, price labour, plant and overheads, and put together the tender. Modelled pay sits around $122,400 a year nationally, and about $134,000 in WA.

Checked against 3 sources

Electrical estimator in a coral shirt smiling up from large plans with a scale ruler
Core work
Take-offs, pricing, tenders
Typical hours
About 42 a week full-time
Modelled pay
About $122,400 a year (Aus)
Common entry
Trade background or Cert IV

What does an electrical estimator actually do?

The estimator prices the job before the contract is signed. Government occupation data describes construction estimators as people who prepare estimates and cost plans for a project up to the point the tender is settled. On an electrical job that means reading the drawings and the specification, counting every light, power point, cable run, switchboard and containment length, then turning that count into a price.

The count is called a take-off. Once you have it, you price materials from supplier quotes, add labour hours for each item, then add plant, site costs, supervision and margin. The total goes into a tender with your clarifications and exclusions. If the price is too high you lose the job. If it is too low the company wins work that loses money, so accuracy matters more than speed.

Where does the work happen?

Most of the week is at a desk with drawings, spreadsheets and estimating software. The WA Construction Training Fund describes estimating as a mix of office and site work. Site visits matter on refurbishments and upgrades, where the drawings rarely show what is behind the ceiling or inside an old switchroom.

Estimators work with project managers to agree scope, value and timeframes. They also prepare and lodge tender documents and track budgets on jobs that are already running. Full-time is the norm. Jobs and Skills Australia data shows 87 per cent of construction estimators work full-time hours, averaging 42 hours a week.

Who moves into estimating?

A lot of electrical estimators start out as electricians. They know what a cable pull or a board installation really takes, and that makes their labour hours believable. Some move across after an injury, some to get off the tools as they get older, and some because they like the numbers side of running a job.

Others come through study. Census data for construction estimators shows about 26 per cent hold a Certificate III or IV as their highest qualification and about 30 per cent hold a bachelor degree. The median age is 40. From estimating, the usual next steps are estimating manager, building scheduler or contract administrator.

What software do estimators use?

Expect to spend your day in estimating software and spreadsheets. Most contractors run a dedicated estimating package with a database of materials and labour units, plus a digital take-off tool that lets you measure and count straight off PDF drawings. Which package you use depends on the employer, and each one takes a few weeks to learn properly.

The software is only as good as the person using it. If you don't understand how a job actually goes together on site, a clean printout can still carry the wrong labour hours. Good estimators check their unit rates against what jobs really cost and adjust them when the finished numbers come back.

Pay

Australia
$122,400
New South Wales
$123,200
Victoria
$120,700
Queensland
$121,100
Western Australia
$134,000
South Australia
$115,600
Tasmania
$108,200
Northern Territory
$125,900
Australian Capital Territory
$133,400

AUD a year, before tax. Based on Australian Bureau of Statistics Employee Earnings and Hours, May 2025, for estimators and contracts staff, moved to 2026 with a wage index. State figures are modelled. Project size, employer and sector move the figure. Refer to the Estimators & Contracts salary guide for figures from live adverts.

What you need

  • Reading drawingsYou need to read electrical drawings, specifications and plans accurately. Most of the job depends on this.
  • Electrical knowledgeYou need to know how installations go together and how long each task takes on site. That knowledge is why so many estimators come from the trade.
  • Numeracy and accuracySmall counting or rate errors add up across a big tender. A careful, methodical approach matters.
  • Estimating qualificationWA's Construction Training Fund lists the Certificate IV in Building Project Support (Estimator) as the qualification for estimators in construction.
  • Software skillsYou need to be comfortable with estimating packages, digital take-off tools and spreadsheets.
  • CommunicationYou will deal with project managers, suppliers and builders, and you will write clarifications and exclusions that hold up if the job is disputed later.

How to get there

  1. Year 1-4Learn the trade or the theoryMost people either finish an electrical apprenticeship or study a building or engineering qualification. Time on the tools gives you realistic labour hours.
  2. Year 4-6Get close to the numbersAsk to help with variations, material orders or small quotes while you are still on site.
  3. Year 5-7Take a junior estimator roleStart with take-offs and supplier pricing on small commercial jobs while a senior estimator checks your work.
  4. Any timeAdd formal trainingA Certificate IV in Building Project Support (Estimator) covers estimating, tendering and costing.
  5. Year 7+Price full tendersRun complete tenders on your own, including labour, plant, preliminaries and margin.
  6. Year 10+Step upMove into estimating manager, building scheduler or contract administrator roles.

Open now on ElectricalRoles.com.au

See all →

Questions people ask

Do you need to be an electrician to become an electrical estimator?

No qualification is set in stone for the role, but many electrical estimators come from the trade. Knowing how long work really takes on site makes your prices more reliable. People without a trade usually come in through building, engineering or estimating study.

What is a take-off?

A take-off is the count of every item on the drawings, such as fittings, outlets, cable lengths, boards and containment. It is the base of the estimate. Labour hours and material prices are applied to it to build the tender price.

How much does an electrical estimator earn?

Modelled pay for estimators and contracts staff is about $122,400 a year across Australia. It runs from about $108,200 in Tasmania to about $134,000 in Western Australia. The actual figure depends on the size of the projects and the employer.

Is estimating an office job?

Mostly. You spend most of your time at a desk with drawings and software, with site visits for refurbishments and pre-tender inspections. It suits people who want to step back from physical work but stay in the industry.

What qualification helps you get into estimating?

WA's Construction Training Fund lists the Certificate IV in Building Project Support (Estimator). Census data shows construction estimators commonly hold a Certificate III or IV or a bachelor degree. For electrical work, a trade background and estimating experience usually count for more than paperwork.

Sources

  1. Jobs and Skills Australia: Construction Estimators (ANZSCO 312114)
  2. Queensland Skills Gateway: Construction Estimator
  3. Construction Training Fund (WA): How to become an estimator

Let employers come to you

Upload your CV and we build your profile from it. Employers contact you. Free for job seekers.

Create your profile
Free email alerts

Be the first to know.

New electrical jobs, employers and talent, straight to you as they go live. Stay in the loop.

Get the inside track →