electricalroles.com.auJoin

What does an electrical supervisor do in Australia?

Short answer

An electrical supervisor is a licensed electrician who runs a crew. They plan the work, check and test what the crew installs, and carry the legal duty for apprentices and other supervised workers. The modelled figure for supervisors and forepersons is about $117,700 a year nationally.

Checked against 9 sources

Woman electrical supervisor in orange leading a smiling crew's toolbox talk on a sunny concrete deck
Typical pay
About $117,700 a year (modelled)
Licence
Unrestricted electrician licence
Leading hand rate
$48.12 to $90.65 a week extra
Main duty
Safe, compliant work from the crew

What does an electrical supervisor actually do?

You run the crew's work and you answer for it. A normal day means handing out tasks, deciding how closely each apprentice needs watching, checking work as it goes in, and testing it when it's finished. In Western Australia, Building and Energy says the supervising electrical worker is responsible for checking and testing everything an apprentice does against the Wiring Rules and the state requirements. Most supervisors still work on the tools for part of the day.

Queensland's regulator says this plainly: supervising takes more than knowing the trade, because you are doing your own work while directing others, and it suits some tradespeople better than others. You also plan the job, run risk assessments and safe work method statements, give toolbox talks, and make sure every worker holds the right licence for the task in front of them.

Leading hand, supervisor or foreperson: what's the difference?

The award draws the first line. Under the Electrical, Electronic and Communications Contracting Award 2020, a leading hand is an electrical worker, other than a supervisor or foreperson, who is put in charge of work where at least 3 other employees are working. Leading hands get a weekly allowance on top of their rate. The allowance grows with the size of the crew.

A supervisor or foreperson is the next step up. Usually you look after several crews or a whole site, and you deal with the builder, the client and the project manager. Your employer may also nominate you as the licensed person who supervises the contractor's electrical work. In Victoria that is the Technical Supervisor role, and in NSW it is the qualified supervisor certificate.

What safety duties come with the job?

You carry two sets of duties. Electrical safety law covers who can supervise and how closely. Work health and safety law covers the people on site. NSW's supervision standard also requires supervisors to make sure all work health and safety obligations are followed and explained to the apprentice, so electricians who supervise apprentices have to meet both sets of duties.

In Queensland, apprentices in their first six months must not work near live high voltage exposed parts, or anywhere they could touch live low voltage exposed parts. In WA, apprentices must not work on or near energised parts at all, except final-year apprentices doing isolation, testing or fault-finding after you have assessed them as competent, and only under direct supervision. You handle the risk assessment and the final testing.

What changes when you supervise FIFO or remote work?

The electrical rules stay the same on a mine site. What changes is the risk list you have to work through. Building and Energy's guidelines list how remote the site is, the drive in and out, and fatigue from long hours of work or travel as risks a supervisor has to weigh. Mine sites are also named as a work type that changes how much supervision a worker needs.

Labour hire is common on remote jobs. Under WA rules, the labour hire agent keeps the employer's duties. The supervising electrical worker's duties can be formally handed to the client's supervisor through the labour hire arrangement or contract. If your job is covered by the contracting award, the living away from home allowance covers reasonable board and lodging costs up to $720.10 a week.

Pay

Award minimum, electrical worker grade 5 (before allowances)
$58,193
Australia
$117,700
New South Wales
$118,400
Victoria
$116,000
Queensland
$116,400
Western Australia
$128,800
South Australia
$111,100
Tasmania
$104,000
Northern Territory
$121,000

AUD a year, before tax. The award row is the official minimum under MA000025 from 1 July 2026. Leading hands earn an extra $48.12 a week for 3 to 10 employees, $67.15 for 11 to 20 and $90.65 for more than 20. The other rows are estimates for supervisors and forepersons from ABS Employee Earnings and Hours (May 2025), moved forward with a wage index. State figures are modelled. Overtime, site allowances and FIFO rosters push actual earnings higher. Refer to the Supervisors, Foremen & Leading Hands salary guide for figures from live adverts.

What you need

  • Unrestricted electrician licenceEvery state covered here requires the supervisor to hold a licence that allows them to do the work without supervision. In Queensland you may only supervise work within the scope of your own licence.
  • NSW qualified supervisor certificateIn NSW you need this certificate to supervise or do electrical wiring work without supervision as an employee, partner or company director of a contractor licence holder.
  • Competence to superviseWA employers must check that a supervisor has the technical knowledge, the experience in that type of work and the communication skills to supervise effectively.
  • Knowledge of the supervision levelsYou need to know the direct, general and broad levels, and the rules for when an apprentice can move from one to the next.
  • Testing and verificationYou are responsible for testing the work your apprentices and supervised workers do before it is energised or handed over.

State by state

New South WalesSince 1 September 2024 the Supervision Practice Standard has been a condition of every electrician's licence, and only a licensed electrician may supervise apprentices. Ratios are 1:1 under direct supervision, 1:3 under general and 1:5 under broad, and Building Commission NSW enforces the standard.
VictoriaA Technical Supervisor works for a Registered Electrical Contractor and must provide effective supervision. That means attending the site as much as needed and giving detailed instructions. They must make sure a Licensed Electrical Inspector inspects prescribed installation work before supply is connected.
QueenslandThere are no set apprentice-to-supervisor ratios. The employer and supervisor set the level of supervision from the type of work, the risk and the apprentice's competence. Apprentices must never be supervised by other apprentices or by trades assistants.
Western AustraliaA supervising electrical worker may supervise no more than 2 workers if one of them needs direct supervision, and no more than 4 in any case. Under broad supervision the supervisor must visit the work at least once a day.

How to get there

  1. StartFinish your apprenticeship and get licensedEarn your trade qualification and get an unrestricted licence. Until then you cannot legally supervise anyone's electrical work.
  2. After licensingBuild experience on the toolsWork across a range of jobs so you can judge risk and competence in other people. Regulators expect supervisors to have experience in the type of work they oversee.
  3. Early careerTake charge of apprenticesSupervise apprentices at direct, general and broad levels, and keep records of what each one can do safely.
  4. Mid careerLeading handTake charge of a crew of 3 or more and earn the leading hand allowance. Learn to plan the work, run toolbox talks and do the paperwork.
  5. Later careerSupervisor or forepersonRun several crews or a whole site. In NSW and Victoria this can include the qualified supervisor or Technical Supervisor role.
  6. SeniorNext movesCommon next steps are project management, estimating or running your own contracting business.

Open now on ElectricalRoles.com.au

See all →

Questions people ask

Do you need a special licence to be an electrical supervisor?

In most states the base requirement is an unrestricted electrician licence plus the experience to supervise. NSW also has a qualified supervisor certificate for people who supervise wiring work for a licensed contractor. In Victoria, a contractor's nominated supervisor is called a Technical Supervisor.

How much extra does a leading hand get?

Under the contracting award from 1 July 2026, a leading hand gets $48.12 a week extra for 3 to 10 employees, $67.15 for 11 to 20 and $90.65 for more than 20. It is paid on top of the minimum rate for the highest classification supervised, or the leading hand's own rate if that is higher.

How many apprentices can one supervisor look after?

It depends on the state. NSW sets ratios of 1:1 for direct, 1:3 for general and 1:5 for broad supervision. WA caps it at 4 supervised workers, or 2 if one of them needs direct supervision. Queensland has no fixed ratio and leaves it to an assessment of the work and the apprentice.

Who is responsible if an apprentice's work is unsafe?

The supervisor carries a large share of it. Queensland says the licensed worker supervising an apprentice is ultimately responsible for testing the apprentice's work, and WA puts checking and testing on the supervising electrical worker. The employer also keeps its own duties under work health and safety law.

Can an apprentice work live under a supervisor?

In Queensland, apprentices in their first six months must not work near live high voltage exposed parts, or anywhere they could touch live low voltage exposed parts. In WA, apprentices must not work on or near energised parts at all, except final-year apprentices doing isolation, testing or fault-finding after the supervisor has assessed them as competent, and only under direct supervision.

Sources

  1. Fair Work Ombudsman: Electrical, Electronic and Communications Contracting Award 2020
  2. Fair Work Ombudsman: MA000025 pay guide effective 1 July 2026
  3. NSW Government: Supervision Practice Standard for licensed electricians supervising apprentices
  4. NSW Fair Trading: Supervision Practice Standard for licensed electricians supervising apprentices
  5. ABLIS: Qualified Supervisor Certificate, Electrical Work, NSW
  6. Energy Safe Victoria: Technical supervisors
  7. WorkSafe Queensland: Supervising electrical apprentices
  8. WorkSafe Queensland: Electrical apprentices and trainees
  9. Building and Energy WA: Safe working guidelines for electrical workers and apprentices (Feb 2025)

Supervisors, Foremen & Leading Hands jobs by city

Let employers come to you

Upload your CV and we build your profile from it. Employers contact you. Free for job seekers.

Create your profile
Free email alerts

Be the first to know.

New electrical jobs, employers and talent, straight to you as they go live. Stay in the loop.

Get the inside track →