electricalroles.com.auJoin

What does a FIFO electrician earn in Australia, and how do you get started?

Short answer

We couldn't find a reliable published figure for FIFO electrician pay. As a guide, industrial electricians earn about $117,700 a year nationally, or $128,800 in WA (modelled ABS data). The legal minimum under the contracting award is $29.45 an hour. Mine site rates are set by the Mining Industry Award or an enterprise agreement.

Checked against 10 sources

Two FIFO electricians in hi-vis laughing as they walk across a red-dirt airstrip from a charter plane
Typical pay
$117,700 a year (modelled ABS)
Award floor
$29.45/hr, grade 5 (MA000025)
Licence
Full electrician's licence
Main hurdle
Industrial experience and inductions

What does a FIFO electrician earn?

We couldn't find a reliable published source for FIFO electrician pay, so this guide gives no FIFO figure. As a guide, ABS-based modelling puts industrial electricians at about $117,700 a year nationally and $128,800 in Western Australia. Those figures are not FIFO-specific. Jobs and Skills Australia reports median full-time earnings of $2,191 a week for all electricians. It also reports an average full-time week of 45 hours.

Away from mine sites, the legal floor for a qualified electrician under the Electrical, Electronic and Communications Contracting Award is $29.45 an hour, or $1,119.10 a week, from 1 July 2026. Mine site employers are often covered by the Mining Industry Award 2020 instead. That award covers most mining employers across Australia, but not coal mining (black coal falls under the Black Coal Mining Industry Award). It covers staff mainly employed to maintain or repair plant, and it has its own licence allowance for electricians. Many large sites pay under enterprise agreements, so read the offer closely.

How do FIFO rosters work?

FIFO means you fly to a remote site, work a block of long shifts and stay in camp, then fly home for a break. WA's FIFO code of practice describes it as working a regular roster on site, alternating with time at your permanent home. Rosters vary by site, employer and contract. The job ad or offer should state the roster, shift length and whether you work days, nights or a mix.

Think about the roster before you think about the money. Long swings away are hard on relationships, sleep and health. WA has a separate code of practice for mentally healthy FIFO workplaces because of this. Ask about camp conditions, your flight point and what happens if you need to go home early.

What do mine sites want from an electrician?

Sites want a fully licensed electrician who can work safely on their own in heavy industrial plant. Experience with motors, variable speed drives, switchrooms, conveyors, pumps and fault-finding counts for more than housing work. Instrumentation and high voltage skills open more doors. Employers also check your safety record and how you handle permits and isolations.

Before you touch anything, you'll need each site's induction. In Queensland coal, the regulation says a new coal mine worker must not carry out a task until they've had induction training. Recognised Standard 11 sets out how training in coal mines is delivered. WA mine sites operate under the Work Health and Safety (Mines) Regulations 2022.

How do you get your first FIFO role?

Get your licence and some industrial experience first. Few operators will fly out a newly licensed electrician who has only done domestic work. A year or two in a factory, plant, shutdown crew or industrial contractor makes your resume much stronger. If you're licensed in another state, WA recognises interstate and New Zealand licences through mutual recognition.

Shutdown and maintenance contractors are a common way in, because they hire for short campaigns and need numbers. Do one or two shutdowns well and you'll be in line for longer swings. Keep your licence, police check and site training records ready to send. Apply directly to contractors as well as through ads.

Pay

Award minimum, electrical worker grade 5 (MA000025, from 1 July 2026)
$58,193
Industrial electrician, Australia (modelled ABS)
$117,700
Industrial electrician, Western Australia (modelled)
$128,800
Industrial electrician, Queensland (modelled)
$116,400
Industrial electrician, Northern Territory (modelled)
$121,000

AUD a year, before tax. Only the award row is an official legal minimum. The other rows are based on the ABS Employee Earnings and Hours survey (May 2025), moved to 2026 with a wage index, and the state figures are modelled. None of these figures is specific to FIFO work. Roster, overtime, site allowances and enterprise agreements move actual FIFO pay. Refer to the Industrial & Mining Electricians salary guide for figures from live adverts.

What you need

  • Electrician's licenceWA requires a completed approved apprenticeship or equivalent training, passed exams and assessments, and a satisfactory safety assessment. You must also show you're a fit and proper person.
  • Police checkWA licence applications need a police check from an approved provider. It must be less than 3 months old.
  • Licence in the right stateWA recognises licences from other Australian states and New Zealand through mutual recognition. Arrange this before you apply for WA site work.
  • Site inductionEach mine runs its own induction. In Queensland coal mines, new workers can't carry out tasks until they've finished induction training.
  • Industrial experienceEmployers look for work on motors, drives, switchrooms and fault-finding in heavy plant. Domestic experience alone rarely gets you on site.

State by state

Western AustraliaElectrical licensing is run by the Department of Local Government, Industry Regulation and Safety. Worker licences are issued for 1 or 5 years, and new applications need a police check less than 3 months old.
QueenslandUnder the Coal Mining Safety and Health Regulation 2017, a new coal mine worker must not carry out a task until they've had induction training. Recognised Standard 11 covers training in coal mines.
Northern TerritoryNT WorkSafe guidance says a contractor doing electrical installation work on a mine site under their own contractor's licence must issue a Certificate of Compliance.

How to get there

  1. Years 1-4Finish your apprenticeshipComplete an approved electrical apprenticeship and pass the required assessments.
  2. End of year 4Get licensedApply for your electrician's licence in your home state. If you're moving to WA, transfer it through mutual recognition.
  3. Years 5-6Build industrial experienceWork in heavy industry, a plant, or for an industrial or shutdown contractor. Focus on drives, motors and fault-finding.
  4. Year 5 onwardPick up shutdown workApply to maintenance and shutdown contractors that hire for short campaigns on mine sites.
  5. Year 6 onwardMove to a permanent FIFO rosterUse your shutdown record to apply for ongoing maintenance roles on a fixed roster. Complete each site's induction.

Open now on ElectricalRoles.com.au

See all →

Questions people ask

Is there an official FIFO electrician salary?

No. We couldn't find a reliable published FIFO pay figure. The official floor is the award minimum, which is $29.45 an hour for a grade 5 electrical worker under the contracting award from 1 July 2026. Mining employers may use the Mining Industry Award or an enterprise agreement instead.

Can I go FIFO straight after my apprenticeship?

It's possible, but it's hard without industrial experience. Most site employers want electricians who can fault-find in heavy plant without supervision. A year or two of industrial or shutdown work makes a first FIFO job much more likely.

Do I need a WA licence to work on WA mine sites?

Yes. Electrical work in WA needs a WA licence. If you hold a licence in another state or New Zealand, you can have it recognised in WA through mutual recognition. Your application needs a police check that's less than 3 months old.

Which award covers electricians on mine sites?

The Mining Industry Award 2020 covers most mining employers across Australia, but not coal mining (black coal falls under the Black Coal Mining Industry Award). It includes employees mainly employed to maintain or repair plant, and the award has a licence allowance for electricians. Many large operations pay under enterprise agreements instead.

What is an induction and who pays for it?

An induction is site-specific safety training that each mine requires before you start work. In Queensland coal mines, the law says a new worker can't carry out tasks until it's done. Ask your employer who pays for any training needed before you start.

Sources

  1. WA Department of Local Government, Industry Regulation and Safety: electrical licensing
  2. Jobs and Skills Australia: Electricians occupation profile
  3. Jobs and Skills Australia: Electricians (ANZSCO 3411) occupation profile
  4. Fair Work Ombudsman: Mining Industry Award 2020
  5. Fair Work Ombudsman: Mining Industry Award summary
  6. Fair Work Ombudsman: Electrical contracting award pay guide (MA000025)
  7. WorkSafe WA: FIFO code of practice
  8. Queensland Legislation: Coal Mining Safety and Health Regulation 2017
  9. Resources Safety & Health Queensland: Recognised Standard 11
  10. NT WorkSafe: Electrical installation work on mine sites

Industrial & Mining Electricians jobs by city

Let employers come to you

Upload your CV and we build your profile from it. Employers contact you. Free for job seekers.

Create your profile
Free email alerts

Be the first to know.

New electrical jobs, employers and talent, straight to you as they go live. Stay in the loop.

Get the inside track →