electricalroles.com.auJoin

What does an instrumentation electrician do in Australia?

Short answer

An instrumentation electrician installs, calibrates, tests and repairs the sensors, transmitters and control systems that run process plants. Most hold an electrician's Certificate III (UEE30820) and an instrumentation qualification such as UEE31225 or a Certificate IV. Modelled pay sits around $101,100 a year.

Checked against 10 sources

Grinning instrumentation electrician in orange coveralls calibrating a pressure transmitter among yellow pipework
Core trade
UEE30820 electrician Cert III
Instrument ticket
UEE31225 or Cert IV I&C
Modelled pay
About $101,100 a year (national)
Key extra
Hazardous areas (EEHA) units

What does the job involve?

Instrumentation work covers the gear that measures and controls a process: flow, level, pressure and temperature transmitters, analysers, control valves and the control systems behind them. The national occupation description lists diagnosing faults, replacing worn parts and wiring, installing instruments and control systems, and commissioning them. The work draws on electrical, electronic, mechanical, hydraulic and pneumatic principles, so one shift you are chasing a 4-20 mA loop and the next you are stroking a pneumatic valve.

On site the role is usually called E&I, short for electrical and instrumentation. An E&I tradesperson does both sides: power circuits, motors and switchboards as well as the instrument loops that feed the control system. Plant employers prefer one person who can isolate, test and fix the whole circuit, so nobody has to wait for a second trade.

Why most people go dual trade

The instrumentation Certificate III, UEE31220, states that no licensing requirements applied to it when it was published. Because the national qualification lists no licensing requirement of its own, in most states an instrument ticket alone does not let you do licensed electrical work. Queensland is an exception: there, the instrumentation and control apprenticeship leads to an electrical licence. Elsewhere the electrician Certificate III, UEE30820, is the licensing qualification, and in most states you have to complete it as an apprenticeship or through the Trades Recognition Australia pathway to get an unrestricted licence.

So the usual route is to finish the electrical apprenticeship, get licensed, then add instrumentation. One council E&I apprenticeship we looked at had apprentices complete the electrician Certificate III first, then a Certificate IV in Instrumentation and Control. In Victoria, for example, the A Grade licence from Energy Safe Victoria needs the Certificate III, a 4-year training contract and at least 12 months of installation work.

Hazardous areas competencies

Gas plants, fuel terminals, mines and some food and grain sites have explosive atmospheres from gas, vapour or dust. Electrical work there falls under Electrical Equipment for Hazardous Areas (EEHA), and the national units are based on AS/NZS 4761.1. The basics cover reading area classification drawings for zone, gas group and temperature class, explosion protection techniques and Ex certification.

Separate units cover installing Ex equipment and wiring, maintenance, testing, breakdowns and detailed inspection. The detailed inspection unit UEEHA0001 was superseded by UEEHA0020 in October 2022, so make sure your training provider is delivering current codes. Sites will also want their own permits, and sometimes confined space or elevated work platform tickets on top.

Where the jobs are

Instrument work follows process plant. Expect E&I roles on mine sites, in gas and fuel facilities, in processing and manufacturing plants, and in water and wastewater treatment plants and pump stations run by councils and utilities. Regional industrial contractors that build and maintain electrical and instrumentation installations also hire, often for shutdowns and project work.

Energy is another area. South Australia's careers hub says instrumentation skills are in demand in renewables, where systems monitor generation. The trade workforce is older than most: the national profile for instrument trades workers shows a median age of 53, against 40 for all occupations, so retirements will keep opening positions.

Pay

Instrumentation and controls, Australia (modelled)
$101,100
Western Australia (modelled)
$110,600
Queensland (modelled)
$100,000
New South Wales (modelled)
$101,700
Victoria (modelled)
$99,700
Award minimum, Electrical worker grade 5
$58,193
Apprentice year 1 (award)
$29,097
Apprentice year 4 (award)
$47,718

AUD a year, before tax. Market figures are modelled from ABS Employee Earnings and Hours (May 2025) and moved to 2026 with a wage index. State figures are also modelled. Award rows come from the Electrical, Electronic and Communications Contracting Award 2020 rates effective 1 July 2026, with weekly rates multiplied by 52. Overtime, shift work, remote sites and holding both trades push earnings up. Refer to the Instrumentation, Controls & Automation salary guide for figures from live adverts.

What you need

  • Electrician Certificate IIIUEE30820 Certificate III in Electrotechnology Electrician. For an unrestricted electrical licence, complete it as an apprenticeship or through Trades Recognition Australia.
  • Electrical licenceIssued by the state regulator once you finish your apprenticeship. In Victoria it is the A Grade licence from Energy Safe Victoria.
  • Instrumentation qualificationUEE31225 Certificate III in Instrumentation and Control, which replaced UEE31220 in July 2025, or the UEE42220 Certificate IV in Instrumentation and Control.
  • Hazardous areas unitsEEHA units aligned to AS/NZS 4761.1 covering installation, maintenance, testing and inspection of explosion-protected equipment. Sites with explosive atmospheres expect them.
  • Site ticketsSite-specific work permits, plus confined space or elevated work platform tickets where the job needs them.

How to get there

  1. Years 1-4Electrical apprenticeshipSign a training contract and complete UEE30820. Victoria uses a 4-year contract with at least 12 months of installation work. South Australia lists a nominal contract term of 60 months.
  2. End of apprenticeshipGet licensedApply to your state electrical regulator once the apprenticeship is signed off.
  3. Years 4-6Add instrumentationComplete UEE31225 or a Certificate IV in Instrumentation and Control. Some employers run both trades inside one E&I apprenticeship.
  4. Once in a plant roleHazardous areas unitsPick up EEHA units for installation, maintenance and inspection. Employers on gas and mining sites often pay for them.
  5. Year 6 onwardSpecialise or step upMove into automation and control (UEE43225 Certificate IV in Industrial Automation and Control), commissioning, or supervising an E&I crew.

Open now on ElectricalRoles.com.au

See all →

Questions people ask

Can I work as an instrumentation tech without an electrical licence?

Yes, as long as the instrument work is not licensed electrical work. The national instrumentation qualification lists no licensing requirement of its own, so in most states it does not let you do licensed electrical work, though in Queensland the instrumentation and control apprenticeship leads to an electrical licence. Most plant employers advertise for E&I tradespeople, so holding an electrical licence as well opens up far more jobs.

What replaced UEE31220?

UEE31225 Certificate III in Instrumentation and Control replaced UEE31220 on 29 July 2025 and is listed as equivalent. If you started on the old code, your qualification counts as the same.

Are hazardous areas units mandatory?

They are not part of the base electrician qualification. Sites with explosive gas, vapour or dust atmospheres expect EEHA competencies from anyone working on their electrical equipment. The units follow AS/NZS 4761.1, and some jurisdictions also require a licence or certification for this work.

What does an E&I apprentice earn?

Under the Electrical, Electronic and Communications Contracting Award, from 1 July 2026 the minimum is $559.55 a week in year 1, rising to $917.66 a week in year 4. Employers can pay above these minimums.

Which Certificate IV suits instrumentation?

The common choices are UEE42220 Certificate IV in Instrumentation and Control, UEE40920 Certificate IV in Industrial Electronics and Control, and UEE43225 Certificate IV in Industrial Automation and Control. Choose the one that matches the plant work you want.

Sources

  1. training.gov.au: UEE31220 Certificate III in Instrumentation and Control
  2. Queensland Training Information Service: UEE31220 Instrumentation and Control apprenticeship
  3. training.gov.au: UEE30820 Certificate III in Electrotechnology Electrician
  4. training.gov.au: UEEHA0001 detailed inspection for hazardous areas
  5. WA Department of Training and Workforce Development: Work in hazardous areas
  6. Jobs and Skills Australia: Electronic Instrument Trades Workers (Special Class)
  7. Apprenticeships Victoria: Electrotechnology Electrician apprenticeship
  8. Kempsey Shire Council: Apprentice Electrical and Instrumentation Technician
  9. Careers Hub SA: Jobs in energy
  10. Fair Work Ombudsman: Electrical, Electronic and Communications Contracting Award

Instrumentation, Controls & Automation jobs by city

Let employers come to you

Upload your CV and we build your profile from it. Employers contact you. Free for job seekers.

Create your profile
Free email alerts

Be the first to know.

New electrical jobs, employers and talent, straight to you as they go live. Stay in the loop.

Get the inside track →