What qualification do you need?
The qualification is UEE30820 Certificate III in Electrotechnology Electrician, listed as current on the National Training Register. It trains you to select, install, set up, test, fault find, repair and maintain electrical systems and equipment in buildings. It is built around the essential capabilities the electrical regulators expect of an unrestricted electrician. The course has no entry requirements. It is made up of 1,110 weighting points: 990 from core units and 120 from electives, so your employer's work shapes part of what you learn.
The catch is how you complete it. The National Training Register says that in most states and territories, an unrestricted licence requires the Cert III to be done as an apprenticeship or through the Trades Recognition Australia pathway. Your certificate has to show which route you took. A classroom-only Cert III will not get you a full licence. Any work on installations running above 50 V AC or 120 V DC needs a licence or permit.
The apprenticeship and the capstone
Start by finding an employer who will sign you to a training contract. You spend four years on the tools under a licensed electrician and attend trade school blocks at a registered training organisation (RTO). Energy Safe Victoria wants to see a completed four-year contract of training, including at least 12 months of electrical installation work confirmed in writing by your employer. Get a wide spread of work in that time: domestic, commercial and industrial. Regulators look for it.
The capstone is the final practical and theory assessment at the end of the apprenticeship. In Western Australia you apply with your Trade Certificate endorsed Electrical Mechanic and your UEE30820 Cert III, both issued by your RTO in the last two years, plus proof of ID and a police check dated within the past three months. Victoria runs its own version of the capstone, the Licensed Electrician's Assessment. It has three parts: Safe Working Practice, a practical and a theory exam.
Adult apprentices
Starting older is common, and the rules are no different. The Cert III has no entry requirements and no age limit. You still need the apprenticeship contract, the on-the-job hours and the capstone to get a full licence. Previous work in a related trade can help you land an employer, but the four-year contract and supervised installation experience are what regulators check. Plan your budget before you start. First-year award pay is well below what most adults earn in other work, so line up savings or an employer willing to pay above the award.
Overseas electricians
Your overseas licence does not carry across directly. Energy Safe Victoria says it does not assess overseas qualifications. Trades Recognition Australia (TRA) or its nominated training providers do that first. If you pass, TRA issues an Offshore Technical Skills Record (OTSR). In Victoria the OTSR lets you apply for a Supervised Worker's Licence. You then complete Australian context gap training (course 11297NAT), which gives you the Cert III.
To upgrade to an A Grade licence in Victoria, you need at least 75 per cent in both the theory and practical assessments. You also need 12 months of installation work on your supervised licence, confirmed by your employer. In NSW, overseas-trained applicants can apply for a provisional tradesperson certificate. It is issued for three years and cannot be renewed, so use that time to finish the full requirements.
Pay
AUD a year, before tax. Award rows are the official minimums under the Electrical, Electronic and Communications Contracting Award 2020 from 1 July 2026. Typical earnings are modelled from ABS Employee Earnings and Hours (May 2025), indexed to 2026; state figures are modelled, and overtime, allowances and sector move them. Refer to the Electricians (General, Commercial & Domestic) salary guide for figures from live adverts.
What you need
- Training contractYou need an employer to sign you to an apprenticeship. In most states a full licence needs the Cert III done as an apprenticeship or through the TRA pathway.
- UEE30820 Cert IIICertificate III in Electrotechnology Electrician from an RTO. No entry requirements apply.
- Installation experienceVictoria and NSW each look for at least 12 months of relevant electrical installation or wiring work, confirmed by your employer or referee.
- Capstone passYou pass the final capstone assessment through your RTO. In Victoria the Licensed Electrician's Assessment must be completed within five years of your licence application.
- Police checkNSW wants a National Police Check no older than four months. WA wants one dated within the past three months.
- Licence applicationApply to your state regulator and pay the application fee.
State by state
| New South Wales | Building Commission NSW wants the UEE30820 (or an earlier equivalent) and at least 12 months of relevant wiring experience under AS/NZS 3000:2018, confirmed on its Referee's Statement form. You may also be tested on the wiring rules. |
|---|---|
| Victoria | Energy Safe Victoria issues the A Grade licence once you have the Cert III, a completed four-year apprenticeship, a VRQA completion letter and the Licensed Electrician's Assessment. The LEA must be completed within five years of applying. |
| Queensland | An electrical mechanic licence is the open electrical work licence. It covers all electrical work, with eligibility set by section 43 of the Electrical Safety Regulation 2013. |
| Western Australia | Building and Energy issues an electrician's licence after your apprenticeship once you supply your Trade Certificate and Cert III (issued in the last two years), ID and a recent police check. If you have no installing experience, the licence is endorsed 'Electrical Fitting Work Only'. You can keep working on your training licence for up to three months after your contract ends. |
How to get there
- Before year 1Find an employerSign a training contract with an electrical contractor or business willing to take on an apprentice.
- Years 1-4Apprenticeship and trade schoolWork under supervision while completing the UEE30820 Cert III at an RTO. Get domestic, commercial and industrial work if you can.
- Years 2-4Build installation hoursLog at least 12 months of electrical installation work and get it confirmed in writing by your employer.
- End of year 4Pass the capstoneSit the final assessment through your RTO. In Victoria this is the three-part Licensed Electrician's Assessment.
- On completionApply for your licenceLodge your certificate, results, experience evidence, police check and fee with your state regulator.
Open now on ElectricalRoles.com.au
Questions people ask
How long does it take to become an electrician in Australia?
Plan on four years. Victoria's licence rules require a completed four-year contract of training as an apprentice electrician. After that, you apply for your licence once your capstone and paperwork are done.
Can I get a licence with a Cert III done without an apprenticeship?
Generally no. The National Training Register says most jurisdictions need the UEE30820 completed as an apprenticeship or through the Trades Recognition Australia pathway for an unrestricted licence. Your certificate has to show which route you took.
What is the capstone test?
It is the final assessment at the end of your apprenticeship, run by your RTO. Victoria's version is the Licensed Electrician's Assessment, which has safe working, practical and theory parts.
What do apprentices earn?
Under the Electrical, Electronic and Communications Contracting Award, from 1 July 2026 the weekly minimum is $559.55 in first year and $917.66 in fourth year. Many employers pay above these floors.
I'm a qualified electrician from overseas. Where do I start?
Start with Trades Recognition Australia, which assesses your skills and can issue an Offshore Technical Skills Record. In Victoria you then work on a Supervised Worker's Licence, finish gap training and pass the theory and practical tests before applying for an A Grade licence.
Is the licence the same in every state?
No. Each state issues its own licence under its own rules. Queensland calls it an electrical mechanic licence, Victoria calls it an A Grade electrician's licence, and NSW requires the Cert III plus 12 months of relevant wiring experience.
Sources
- National Training Register: UEE30820 Certificate III in Electrotechnology Electrician
- NSW Government (Building Commission NSW): Electrical work licences
- Energy Safe Victoria: Electrician's licence (A Grade)
- Energy Safe Victoria: International electrical workers
- WorkSafe Queensland: Classes of electrical licences
- WA Government: Electrician's licence on completion of apprenticeship
- Fair Work Commission: Electrical, Electronic and Communications Contracting Award 2020



