electricalroles.com.auJoin

How do you get an electrical licence in Queensland?

Short answer

Finish a Queensland apprenticeship and the qualification (such as UEE30820 Certificate III in Electrotechnology Electrician). Your RTO then sends a completion statement and you apply to the Electrical Safety Office for an electrical mechanic licence. Work licences last five years. Running a business needs a separate contractor licence, renewed each year.

Checked against 7 sources

Woman electrician in a teal polo chatting with a laughing homeowner on a yellow Queensland verandah
Regulator
Electrical Safety Office (OIR)
Work licence term
5 years
Contractor licence term
1 year
Contractor insurance
$5m liability, $50k consumer

Work licence or contractor licence?

Queensland splits licensing in two. An electrical work licence covers you as a person doing the work. The classes are electrical mechanic, electrical fitter, electrical linesperson, electrical jointer, restricted electrical licence and the electrical work training permit. Most sparkies coming out of an apprenticeship want the electrical mechanic licence. Work licences run for five years. Training permits run for 12 months.

An electrical contractor licence covers a business. You need one to do electrical work for others as a sole trader, partnership or company, and it has to be renewed every year. The business nominates a qualified technical person (QTP) and a qualified business person (QBP). One person can fill both roles. An interstate contractor licence does not let you trade in Queensland.

Who runs licensing in Queensland?

The Electrical Safety Office (ESO) sits within the Office of Industrial Relations and handles electrical licences, publishing its pages through WorkSafe Queensland. Applications go through the ESO Electrical Licensing Portal, which uses a Digital ID to confirm who you are. Digital ID is voluntary. If you don't want to use it, ring 1300 632 993 and they'll arrange another way. The portal is new and the ESO has warned that processing may be slow.

Queensland has no electrical licensing board that issues licences. If you disagree with a licence decision, the Electrical Licensing Committee reviews it. You lodge Form 17 within 14 days of getting the decision notice. After the Committee rules, you can take it to the Queensland Civil and Administrative Tribunal (QCAT).

What evidence do apprentices need?

Most people take the completing apprentice route. You finish a Queensland apprenticeship, get the qualification, and your RTO lodges a completion statement (DESBT form ATF012). You can't submit that statement yourself, and you don't need to attach your certificate. No licence is issued until the training department tells the ESO you have completed.

A completion statement stays current for three years. Leave it longer and you may be put on a training permit so an RTO can confirm you are still competent. Every applicant must read and write English without an interpreter and have done CPR training within the last 12 months. Linespeople also need pole-top or tower rescue in that window.

Restricted licences and contractor requirements

A restricted electrical work licence covers electrical work that comes with another trade. Examples are fridgies, instrument techs, plumbers on hot water systems, gas fitters, electronics techs and mechanical fitters swapping out motors. You have to show an occupational need, sometimes with an employer letter or a statutory declaration. A restricted licence never covers electrical installation work.

For a contractor licence, the QTP needs a current Queensland work licence held for at least two years. Without that, they need other evidence of experience, or the business may get a narrower scope. The QBP needs set business units, including UEEEL0040. Insurance must include public and products liability of at least $5 million and consumer protection cover of at least $50,000.

Pay

Electrician, Queensland (modelled)
$116,400
Electrician, Australia
$117,700
Award minimum, Electrical worker grade 5
$58,193
Apprentice year 1 (award, 52 weeks)
$29,097
Apprentice year 2 (award, 52 weeks)
$34,916
Apprentice year 3 (award, 52 weeks)
$40,735
Apprentice year 4 (award, 52 weeks)
$47,718

AUD a year, before tax. Electrician figures come from ABS Employee Earnings and Hours, May 2025, moved to 2026 with a wage index. The Queensland figure is modelled. Award minimums come from the Electrical, Electronic and Communications Contracting Award 2020 (MA000025) from 1 July 2026, with apprentice weekly rates multiplied by 52. Overtime, allowances and site or FIFO work push actual earnings well above award minimums. Refer to the Electricians (General, Commercial & Domestic) salary guide for figures from live adverts.

What you need

  • QualificationA relevant apprenticeship completed in Queensland plus the approved qualification, for example UEE30820 Certificate III in Electrotechnology Electrician.
  • Completion statementYour RTO lodges DESBT form ATF012 directly with the ESO. It stays current for three years.
  • EnglishYou must read, write and understand English well enough to work without an interpreter.
  • CPR and rescueCPR training in the last 12 months, plus pole-top or tower rescue for linespeople. You may be audited for certificates.
  • Digital IDThe ESO Electrical Licensing Portal uses a Digital ID to confirm who you are. Ring 1300 632 993 if you want another way to apply.
  • Contractor extrasYou need a nominated QTP and QBP, a fit and proper declaration, and insurance that meets section 165 of the Electrical Safety Regulation 2026.

State by state

Interstate and New Zealand workersSome interstate and New Zealand licence classes, mainly electrical mechanic equivalents, let you work within their scope in Queensland without a Queensland licence. Holders of other classes apply under mutual recognition.
Interstate contractorsAn interstate contractor licence is not valid in Queensland, so you must get a Queensland one. Sole traders holding an interstate contractor licence in their own name can apply under mutual recognition. The QTP must hold a Queensland work licence.
QBCC licence holdersA business with the right QBCC trade contractor licence, such as a plumber, may not need an ESO contractor licence for minor incidental electrical work. The workers still need the relevant restricted electrical work licence.

How to get there

  1. Year 0Sign an apprenticeshipStart a Queensland electrical apprenticeship and enrol in UEE30820 with an RTO.
  2. Years 1-4Train on the toolsWork under supervision while you complete the qualification and your employer signs off your competence.
  3. Year 4Complete and do CPRFinish the apprenticeship, do CPR within 12 months of applying, and have the RTO lodge your completion statement.
  4. End of year 4Apply for electrical mechanicApply through the ESO Electrical Licensing Portal as a completing apprentice and pay the fee.
  5. Every 5 yearsRenew every five yearsBefore each renewal, do skills maintenance within two years and CPR within 12 months. The ESO runs a free online assessment.
  6. Year 6 onwardGo contractingAfter two years holding a Queensland licence you can be a QTP. Add the QBP units and insurance for a contractor licence.

Open now on ElectricalRoles.com.au

See all →

Questions people ask

How long is a Queensland electrical work licence valid?

Work licences such as electrical mechanic last five years. Electrical work training permits last 12 months. Contractor licences have to be renewed every year.

What happens if my licence expires?

Within 12 months of expiry you can reinstate it, and the expiry date stays as if you had renewed on time. After 12 months you have to apply for a new licence.

What do I need to renew?

Skills maintenance completed within the last two years and CPR within the last 12 months, plus pole-top rescue if your licence needs it. You can do the free ESO online assessment or an approved unit such as UEEEL0002.

Can I work in Queensland on my NSW or Victorian licence?

Some interstate electrical mechanic equivalents let you work within their scope without a Queensland licence. Otherwise you apply under mutual recognition with your licence details and any conditions or disciplinary history. You need a Queensland licence to be the QTP on a contractor licence.

Does a restricted licence let me install wiring?

No. A restricted electrical work licence covers only work that comes with your trade, such as disconnecting and reconnecting a motor or hot water system. It never covers electrical installation work.

Who reviews a refused licence application?

The Electrical Licensing Committee. You apply on Form 17 within 14 days of the decision notice, and after that you can go to QCAT.

Sources

  1. WorkSafe Queensland: Electrical licences
  2. WorkSafe Queensland: Electrical contractor licences
  3. WorkSafe Queensland: Restricted electrical work licences/permits
  4. WorkSafe Queensland: Interstate and New Zealand electrical work licence holders
  5. WorkSafe Queensland: Interstate and New Zealand applicants
  6. Electrical Safety Office: Electrical licensing eligibility guide (PDF)
  7. Fair Work Commission: Electrical, Electronic and Communications Contracting Award 2020

Electricians (General, Commercial & Domestic) jobs by city

Let employers come to you

Upload your CV and we build your profile from it. Employers contact you. Free for job seekers.

Create your profile
Free email alerts

Be the first to know.

New electrical jobs, employers and talent, straight to you as they go live. Stay in the loop.

Get the inside track →