electricalroles.com.auJoin

What does a maintenance electrician do in Australia?

Short answer

A maintenance electrician keeps plant running. You find and fix faults, do planned maintenance and work on motors, drives and PLC controls in factories, food plants and industrial sites. You need a Certificate III in Electrotechnology Electrician and a state electrical licence. Modelled median pay is about $117,700 a year.

Checked against 6 sources

Maintenance electrician smiling beside a motor control panel among shining steel tanks in a food plant
Qualification
UEE30820 Cert III Electrician
Training time
4-year apprenticeship
Modelled median
About $117,700 a year
Award minimum
$29.45 an hour (grade 5)

What does the job involve day to day?

A new installation gets wired once. A plant has to keep running for years after that, and keeping it running is your job. Most of your shift goes on two kinds of work. Breakdowns come first: a conveyor stops, a motor trips or a sensor fails, and you have to find the cause and get the line going again. The rest of your time goes on planned work, such as testing, checking connections, replacing worn parts and logging what you found so the next fault is easier to chase.

The national occupation classification describes the trade's core tasks as reading wiring diagrams, using test instruments to trace and diagnose faults, and repairing or replacing faulty wiring and parts. In maintenance work those tasks make up most of the day. You will read drawings a lot, work around running machinery under isolation procedures, and talk with operators who can tell you what the machine was doing before it stopped.

Motors, PLCs and controls

Factory plant runs on motors, drives, sensors and programmable logic controllers. The Manufacturing and Associated Industries and Occupations Award 2020 defines its electrical stream to include fault finding, commissioning, maintenance and service of equipment such as wiring, motors, generators, PLCs and other electronic controls. That list is a fair picture of a maintenance electrician's patch.

Your apprenticeship gives you the basics. Confidence with PLCs and drives comes from time on the tools, from watching how a program steps through a sequence and from learning which input stopped the machine. Electricians who can read ladder logic and diagnose a fault online are worth more to a plant, because they get lines back running sooner.

Where maintenance electricians work and the hours

Typical employers include food and beverage plants, packaging and manufacturing sites, water and wastewater sites, councils, hospitals and large commercial buildings. Some roles are in-house with one site. Others are with contractors who send you to several clients on maintenance contracts. Council roles, for example, cover installation and maintenance work across council-owned buildings and assets.

Plants that run around the clock need electricians on every shift, so rotating day, afternoon and night rosters are common, along with call-outs and shutdown work on weekends. Shift penalties and overtime come from your award or enterprise agreement, and they can lift your take-home pay well above the base rate. Before you sign, ask which award or agreement covers the job and what the roster looks like.

How pay works

The modelled median for industrial electricians in Australia is about $117,700 a year. Western Australia and the ACT sit highest, at about $128,800 and $128,200, and Tasmania lowest, at about $104,000. These are typical earnings including the extras many electricians get. They are not minimum rates.

The legal floor is much lower. Under the Electrical, Electronic and Communications Contracting Award 2020, the minimum for an electrical worker grade 5 from 1 July 2026 is $29.45 an hour, or $1,119.10 a week. In-house factory roles can fall under the Manufacturing award or an enterprise agreement instead, so the floor depends on your employer. Shifts, overtime and site allowances explain most of the gap between the award minimum and what people actually earn.

Pay

Australia (modelled median)
$117,700
New South Wales
$118,400
Victoria
$116,000
Queensland
$116,400
South Australia
$111,100
Western Australia
$128,800
Tasmania
$104,000
Award minimum, electrical worker grade 5
$58,193
Award apprentice, year 1 to year 4
$29,097–47,718

AUD a year, before tax. Refer to the Industrial & Mining Electricians salary guide for figures from live adverts.

What you need

  • Certificate IIIUEE30820 Certificate III in Electrotechnology Electrician is the national electrician qualification, completed through an apprenticeship.
  • Electrical licenceElectricians must be registered or licensed. The licence comes from the electrical regulator in the state or territory where you work.
  • Apprenticeship timeIn Victoria the apprentice pathway requires a completed 4-year training contract, including at least 12 months of electrical installation work confirmed by your employer.
  • Licence assessment (Victoria)Victoria also requires the Licensed Electrician's Assessment: Safe Working Practice, a practical test and a theory test, all completed within 5 years of applying.
  • Fault-finding skillEmployers look for confidence with test instruments, motor circuits, drives and PLC-controlled plant, and for safe isolation habits.

State by state

VictoriaEnergy Safe Victoria issues the Electrician's licence (A Grade), which lets you do electrical installation work without supervision as an employee. Contracting for profit also needs Registered Electrical Contractor registration.

How to get there

  1. Year 1Start an electrical apprenticeshipSign a training contract and enrol in UEE30820. An apprenticeship with a manufacturer or industrial contractor gets you onto plant early.
  2. Year 1-4Build plant and controls experienceWork on motors, starters, drives and control circuits under supervision, and log your installation work hours.
  3. Year 4Pass the licence assessmentFinish the Certificate III and pass your state's licensing assessment, such as Victoria's LEA.
  4. End of year 4Get your licenceApply to your state electrical regulator for an unrestricted electrician's licence.
  5. Year 5 onwardMove into maintenance and shift rolesTake an in-house or contract maintenance role. Learn the site's PLCs, drives and isolation procedures.
  6. Year 7 onwardSpecialise or step upMove into instrumentation, hazardous areas or supervision, or lead a maintenance crew.

Open now on ElectricalRoles.com.au

See all →

Questions people ask

Is a maintenance electrician a separate licence?

No. It is a type of work done by licensed electricians. You hold the same electrician's licence as other electricians and build your plant and controls skills on the job.

Do maintenance electricians work shifts?

Often, yes. Plants that run around the clock roster electricians across day, afternoon and night shifts, with call-outs and weekend shutdowns. Shift penalties are set by your award or enterprise agreement.

What is the minimum pay for a maintenance electrician?

Under the Electrical, Electronic and Communications Contracting Award 2020, an electrical worker grade 5 earns at least $29.45 an hour from 1 July 2026. Factory roles may fall under the Manufacturing award or an enterprise agreement instead, and those set their own rates.

Do I need to know PLCs?

You can get a maintenance job without being a programmer. You do need to read PLC inputs and outputs and follow the logic well enough to find faults. Electricians who can do this well usually earn more and have more jobs to choose from.

How long does it take to become a maintenance electrician?

Expect about four years. That is the length of the electrical apprenticeship, followed by your state's licence assessment. Many people then spend a few years building plant experience before they run a site's maintenance on their own.

Sources

  1. ABS: ANZSCO 3411 Electricians
  2. Energy Safe Victoria: Electrician's licence (A Grade)
  3. Fair Work: Manufacturing and Associated Industries and Occupations Award 2020
  4. Fair Work: Electrical, Electronic and Communications Contracting Award 2020
  5. training.gov.au: UEE30820 Certificate III in Electrotechnology Electrician
  6. Blue Mountains City Council: Electrician position description

Industrial & Mining Electricians jobs by city

Let employers come to you

Upload your CV and we build your profile from it. Employers contact you. Free for job seekers.

Create your profile
Free email alerts

Be the first to know.

New electrical jobs, employers and talent, straight to you as they go live. Stay in the loop.

Get the inside track →