What does a commissioning technician actually do?
Commissioning is the last stage of a build, after the installers finish and before the client takes over. You check that what was installed matches the drawings, test it, fault-find what fails, and then bring it into service. The ABS describes electrical engineering technicians as people who install, commission, test, monitor, repair and maintain electrical systems in line with safety rules. Commissioning technicians do the commissioning and testing part of that list all day.
On a typical job you read single-line diagrams and P&I diagrams, check loops from field instrument to controller, set up variable speed drives, prove protection and interlocks, and record every result. When something fails, you find the cause, have it fixed and test it again. The paperwork matters as much as the meter work, because your test records are what lets the plant be handed over and switched on.
Where the work is: mining, data centres and renewables
Renewables are a big source of commissioning work. The Clean Energy Council says electricians can make up 30 per cent or more of a solar farm's construction workforce during final commissioning. Large-scale renewable and mining projects often involve travel, remote sites and shift work.
Data centres are another growth area. NECA reported that a set of NSW data centre projects is collectively valued at $51.9 billion, which means a steady pipeline for electrical contractors. Mining and processing plants need commissioning crews for new plant and for shutdown upgrades, and much of that work is in remote areas on rosters.
How do you get into commissioning?
The usual route is a trade first. The Clean Energy Council says the Certificate III in Electrotechnology Electrician is the pathway to an electrician's licence, and that licence covers much of the work in installation, commissioning and operations. It also says training in high voltage work is needed alongside the licence. In South Australia, the state training site says the apprenticeship runs four years and finishing it makes you eligible for unrestricted, unsupervised electrical worker registration.
Once you're licensed, the Certificate IV in Electrical - Instrumentation (UEE40420) is a common next step for process plant work. It covers commissioning, fault finding and maintenance of electrical and instrumentation equipment, plus pressure, level, flow and temperature measurement, fluid power and variable speed drives. Most technicians move across after a few years of industrial or construction work, often starting as the electrician on a commissioning crew.
What the job asks of you
You need to be methodical and comfortable being the person who signs off. Commissioning sites carry live energy and can include heights and confined spaces, such as inside a wind tower, so a strong safety habit is not optional. You'll work beside engineers, vendors and client representatives, so you have to explain clearly why a system passed or failed. Expect long days near handover deadlines, travel between projects and periods of rostered remote work. People who like solving problems more than repeating installs tend to stick with it.
Pay
AUD a year, before tax. Modelled from ABS Employee Earnings and Hours, May 2025, for instrumentation and controls workers, moved to 2026 with a wage index. State figures are modelled estimates. Overtime, site allowances and remote rosters move actual earnings. Refer to the Instrumentation, Controls & Automation salary guide for figures from live adverts.
What you need
- Electrician's licenceMost commissioning work involves electrical work that needs a licence. The Certificate III in Electrotechnology Electrician (UEE30820) is the standard route to it.
- Completed apprenticeshipThe electrician apprenticeship runs four years. In South Australia, finishing it makes you eligible for unrestricted, unsupervised electrical worker registration.
- Instrumentation skillsThe Certificate IV in Electrical - Instrumentation (UEE40420) adds commissioning and fault finding on instrument and control systems, which process plants and mines look for.
- High voltage trainingThe Clean Energy Council says training in high voltage work is also needed for electrical work in clean energy.
- Site readinessLarge-scale renewable and mining projects often involve travel, remote sites and shift work, and safe work at heights or in confined spaces.
How to get there
- Year 1-4Electrical apprenticeshipComplete the Certificate III in Electrotechnology Electrician with an employer. Industrial or commercial placements give the best grounding for commissioning.
- Year 4Get licensedApply for your electrical licence or registration in your state once you've finished the apprenticeship.
- Year 5-7Industrial or construction workBuild experience on switchboards, motor control, drives and plant wiring, ideally on projects that go through handover.
- Year 5-8Add instrumentationStudy the Certificate IV in Electrical - Instrumentation (UEE40420) to cover loops, measurement and control systems.
- Year 6 onwardJoin a commissioning crewStart as the electrician on a commissioning team for a solar farm, data centre or process plant, then work up to leading test packages.
Open now on ElectricalRoles.com.au
Questions people ask
Do you need to be a licensed electrician to work in commissioning?
For most electrical commissioning roles, yes. The Clean Energy Council says the electrician's licence is needed for much of the electrical work in installation, commissioning and operations. The Certificate III in Electrotechnology Electrician is the qualification that leads to it.
Is commissioning the same as instrumentation work?
They overlap. Instrumentation technicians install and maintain measurement and control equipment, while commissioning technicians test complete systems and bring them into service. The Certificate IV in Electrical - Instrumentation includes commissioning, which is why many commissioning technicians hold it.
How much does an electrical commissioning technician earn?
Modelled ABS-based figures for instrumentation and controls work put pay at about $101,100 a year nationally, rising to about $110,600 in Western Australia. The award minimum for an Electrical worker grade 5 is $1,119.10 a week from 1 July 2026. Site allowances, overtime and remote rosters usually lift take-home pay well above that minimum.
What do apprentices earn on the way through?
Under the Electrical, Electronic and Communications Contracting Award 2020, minimum apprentice weekly rates from 1 July 2026 are $559.55 in first year, $671.46 in second, $783.37 in third and $917.66 in fourth. Employers can pay more than this.
Does commissioning work mean FIFO?
Often, but not always. Mining and large renewable projects tend to be remote and often involve travel and shift work. Data centre and commercial building commissioning is mostly in or near cities.
Sources
- Clean Energy Council: Careers by occupation type
- Skills SA: Certificate III in Electrotechnology Electrician
- Jobs and Skills WA: Certificate IV in Electrical - Instrumentation
- training.gov.au: UEE40420 Certificate IV in Electrical - Instrumentation
- training.gov.au: UEE30820 Certificate III in Electrotechnology Electrician
- ABS: OSCA 313232 Electrical Engineering Technician
- NECA: NSW data centre investment
- Jobs and Skills Australia: Electricians



