electricalroles.com.auJoin

Can you use your electrical licence in another Australian state?

Short answer

Partly. Under Automatic Mutual Recognition, a licensed electrician can work in Victoria, South Australia, Tasmania and the Northern Territory after notifying the regulator, with no fee. Queensland is outside AMR, WA excludes electrical licences, and NSW plans to add electrical wiring work from 1 October 2027.

Checked against 8 sources

Woman electrician in a coral shirt smiling from the back of a van beside a coastal highway
Scheme
Automatic Mutual Recognition (AMR)
Not in AMR
Queensland; WA for electrical
NSW wiring work
AMR planned from 1 Oct 2027
New Zealand
Apply under Trans-Tasman MR

How does Automatic Mutual Recognition work?

AMR sits in Part 3A of the federal Mutual Recognition Act 1992. If you hold a licence in your home state, another state can treat you as registered for the same work, with no second application and no fee. Each state chooses which occupations it exempts, and many make you notify the regulator before you start. You keep your home licence current, you follow the local laws where you work, and any conditions on your home licence still apply.

AMR covers individuals only. NSW says licences issued to companies or partnerships are not covered. The NT accepts notifications from sole traders and people with electrical work licences, and Victoria accepts contractor notifications only from sole traders. If your business trades as a company, you will usually need a local contractor licence.

Which states take an interstate electrical licence?

Victoria started AMR for electrical licences on 1 July 2021. Electricians licensed in the ACT, NSW, NT, SA or Tasmania can work there once they notify Energy Safe Victoria through ESVConnect. It costs nothing. You get a Victorian A-grade licence number, with no card, so you can lodge Certificates of Electrical Safety. The number expires when your home licence does, so you notify again each time you renew.

Energy Safe Victoria lists the NT, SA and Tasmania as AMR destinations for Victorian electricians, and each one needs a notification first. In the NT you can start work once the Territory Business Centre has receipted your notification. WA says electrical workers and electrical contractors are outside its AMR scheme, so you need a WA licence through ordinary mutual recognition.

NSW, Queensland and the East Coast scheme

Queensland does not take part in AMR, so Queensland licences do not carry across under it, and other states' licences do not carry into Queensland. To work there you apply for a Queensland licence under mutual recognition through the Electrical Safety Office portal and pay a fee. NSW lists electrical wiring work as intended to join AMR on 1 October 2027. Until then, electricians from SA, WA, Tasmania and the NT apply to Building Commission NSW under mutual recognition and pay the fees.

NSW runs a separate East Coast Electrician's scheme. Electricians from Queensland, Victoria and the ACT are recognised in NSW without notifying. NSW qualified supervisors and endorsed contractors can work in Queensland as electrical mechanics, but contracting there needs a Queensland contractor licence. NSW says its electricians must apply under mutual recognition to work in the ACT.

When do you still need a separate licence?

AMR is meant for people who live and work in their home state and cross the border for jobs. If you move permanently, Victoria and NSW both expect you to apply for a local licence, and the NT expects the same when it becomes your home state. Victoria makes an exception if your main place of work stays in the state that issued your licence. You also apply separately for WA, for Queensland, for company contractor licences, and for any New Zealand licence.

Insurance can block AMR work in NSW. Home building jobs worth $20,000 or more need home building compensation insurance, and NSW says interstate licensees working under AMR cannot get it. You would need to work for a company that holds the cover, or get a NSW licence.

Pay

Australia
$117,700
New South Wales
$118,400
Victoria
$116,000
Queensland
$116,400
South Australia
$111,100
Western Australia
$128,800
Tasmania
$104,000
Northern Territory
$121,000
Australian Capital Territory
$128,200

AUD a year, before tax. Based on ABS Employee Earnings and Hours, May 2025, moved to 2026 with a wage index. State figures are modelled estimates. Overtime, allowances, remote work and the sector you work in all move the figure. Refer to the Electricians (General, Commercial & Domestic) salary guide for figures from live adverts.

What you need

  • Current home licenceYour licence must be in force in your home state and must cover the exact work you plan to do across the border.
  • Clean recordWA, for example, refuses AMR if you are suspended, disqualified, facing disciplinary action, or have conditions on your licence for criminal, civil or disciplinary matters.
  • Notify before you startVictoria, SA, Tasmania and the NT need a notification before you start. Victoria re-issues your AMR number each time you notify after renewing your home licence.
  • Individual, not companyAMR covers individual licences. A company contractor licence needs a local application.
  • Local rules applyYou must follow the destination state's laws, such as lodging Certificates of Electrical Safety in Victoria.
  • Rescue and resuscitationQueensland does not ask for CPR evidence with a mutual recognition application. Section 211 of its Electrical Safety Regulation 2026 still requires anyone doing electrical work there to be competent in rescue and resuscitation.

State by state

VictoriaAMR applies to electrical licences from the ACT, NSW, NT, SA, Tasmania and WA once you notify Energy Safe Victoria, with no fee. Queensland electricians with an A-grade equivalent licence can also work there after notifying, under Victorian exemption provisions.
New South WalesElectrical wiring work is due to join AMR on 1 October 2027. Until then, Queensland, Victorian and ACT electricians are covered by the East Coast Electrician's scheme, and everyone else applies to Building Commission NSW under mutual recognition.
QueenslandQueensland is outside AMR. You apply to the Electrical Safety Office under the Mutual Recognition (Queensland) Act 1992 and pay a fee.
Western AustraliaElectrical workers and contractors are outside AMR in WA. Apply to Building and Energy for a WA licence under mutual recognition.
Northern TerritoryNotify NT WorkSafe of your intent to work under AMR. You can start once the Territory Business Centre receipts the notification, and companies and partnerships cannot use AMR.
South AustraliaEnergy Safe Victoria lists SA as accepting Victorian electrical licences under AMR, provided you notify Consumer and Business Services first.
TasmaniaEnergy Safe Victoria lists Tasmania as accepting Victorian electrical licences under AMR, provided you notify Consumer, Building and Occupational Services first.
Australian Capital TerritoryNSW says its qualified supervisors and endorsed contractors must apply under mutual recognition to work in the ACT. ACT electricians can work in Victoria under AMR and in NSW under the East Coast scheme.

How to get there

  1. Before you quoteCheck your home licenceConfirm it is current and covers the work. Sort out any conditions or disciplinary matters first.
  2. Before you quoteCheck the destination stateFind out whether that state includes electrical licences in AMR. Queensland and WA don't, and NSW won't until October 2027.
  3. Before day oneNotify where AMR appliesLodge the notification, for example through ESVConnect in Victoria or the NT WorkSafe form. Don't start until it is lodged or receipted.
  4. Weeks aheadApply under mutual recognition elsewhereSend the local regulator your licence details and pay the fee. Expect assessment time before you can start.
  5. Each renewalRe-notify on renewalYour Victorian AMR number expires with your home licence, so lodge a new notification each time you renew.
  6. On relocationGet a local licence if you moveOnce your main home moves to the new state, apply for that state's licence.

Open now on ElectricalRoles.com.au

See all →

Questions people ask

Can a New Zealand electrician work in Australia on their NZ licence?

Not under AMR, which doesn't apply to New Zealand licences. You apply to the state regulator under the Trans-Tasman Mutual Recognition Arrangement and pay any fees. Victoria, NSW and Queensland all take these applications.

Can a Queensland electrician work in NSW?

Yes. NSW recognises Queensland electricians under its East Coast Electrician's scheme without a notification. Queensland is outside AMR, so other states, apart from Victoria for A-grade equivalents, need a mutual recognition application.

Does AMR cost anything?

Where AMR applies, there is no fee for working under your home licence. Energy Safe Victoria charges nothing for the notification. Ordinary mutual recognition applications, such as in Queensland, WA or NSW, do carry a fee.

Can my electrical company use AMR?

Usually no. NSW says AMR does not cover licences issued to companies or partnerships, and the NT and Victoria accept contractor notifications only from sole traders. A company applies for the local contractor licence.

What happens if I move interstate for good?

You apply for a licence in your new state. Victoria makes an exception only if your main place of work stays in the state that issued your licence. Victoria lets you convert an AMR number to a full licence through ESVConnect, with a fee.

Sources

  1. Energy Safe Victoria: Interstate electrical workers
  2. NSW Government: Working interstate and mutual recognition
  3. NSW Government: AMR occupations, Electrical
  4. NSW Government: East Coast Electrician's scheme
  5. WorkSafe Queensland: Interstate and NZ electrical work licence holders
  6. WA Government: Automatic Mutual Recognition (AMR)
  7. NT WorkSafe: AMR notification, electrical
  8. DEWR: Mutual recognition

Electricians (General, Commercial & Domestic) jobs by city

Let employers come to you

Upload your CV and we build your profile from it. Employers contact you. Free for job seekers.

Create your profile
Free email alerts

Be the first to know.

New electrical jobs, employers and talent, straight to you as they go live. Stay in the loop.

Get the inside track →