electricalroles.com.auJoin

How do you get an electrical licence in Victoria?

Short answer

Energy Safe Victoria issues the Electrician's Licence (A). Apprentices need the Certificate III in Electrotechnology Electrician, a finished 4-year contract of training with at least 12 months of installation work, and a pass of 75% or better in all 3 Licensed Electrician's Assessment tests. Applying costs $471.50 in 2026–27 and the licence runs 5 years.

Checked against 6 sources

Smiling woman electrician in a yellow hi-vis shirt with red cable over her shoulder in a sunny Melbourne terrace
Regulator
Energy Safe Victoria
Application fee
$471.50 (FY 2026–27), 5 years
Renewal fee
$235.70 every 5 years
LEA pass mark
75% in each of 3 assessments

What the A Grade licence lets you do

In Victoria the Electrician's Licence (A) lets you do electrical installation work without supervision. It covers you as an employee only. To contract for work, quote jobs and get paid for them in your own right, you also need to be registered as a Registered Electrical Contractor (REC). That registration is separate and has its own fee. Most people start on wages under someone else's REC and only look at registration once they have a few years behind them.

The Licensed Electrician's Assessment

The LEA is three separate assessments and you have to pass all of them. The Licensed Electrician's Theory is a written exam of 2 hours 15 minutes. Safe Working Practice runs 50 minutes and tests whether you can safely isolate, disconnect and reconnect equipment. The Licensed Electrician's Practical goes for 4 hours: you design and connect a meter panel and switchboard, find visual defects and match them to the Standards, and test an installation that includes the MEN system. Reading time counts towards each of those durations.

You need 75% or better on each one. Score between 41% and 74% on the theory or practical and you have to wait 14 days before trying again. The same 14-day wait applies after any fail in Safe Working Practice. Score 40% or less, or sit the same test six or more times, and Energy Safe can make you do a review or a training course before you rebook. Bring your own paper copies of the Standards, because the venue will not lend you one. Tabs and highlighting are allowed. Handwritten notes are not.

What an apprentice must finish first

You cannot book the LEA until your RTO gives you an Authorisation to Undertake the Licensed Electrician's Assessment letter. The RTO only issues it once you have finished every required unit of competence. To apply for the licence itself, you need your Cert III, a completion letter from the Victorian Registrations and Qualifications Authority (VRQA), a letter from your employer confirming at least 12 months of installation work, and your three LEA result letters. Your LEA passes have to be less than 5 years old when you apply.

Applying, renewing and CPD

You apply online through ESVConnect and pay by credit card. Upload five documents: your Cert III, the employer letter and the three LEA results. You will also be asked for your VRQA registration number. The licence lasts 5 years, and renewal costs $235.70 under the 2026–27 fees. Every renewal since 1 July 2023 has required continuing professional development. You must complete the Skills Maintenance course within the two years before your renewal falls due. From 2028, electricians will also need to complete Skills Development training to renew.

Pay

Electrician, Victoria (modelled typical earnings)
$116,000
Electrician, Australia (typical earnings)
$117,700
Award minimum, Electrical worker grade 5
$58,193
Apprentice, 1st year award (weekly $559.55)
$29,097
Apprentice, 4th year award (weekly $917.66)
$47,718

AUD a year, before tax. The typical earnings figures are based on the Australian Bureau of Statistics Employee Earnings and Hours survey (May 2025), indexed to 2026. The Victorian figure is modelled. The award rows are official minimums from the Electrical, Electronic and Communications Contracting Award 2020, effective 1 July 2026, with weekly rates multiplied by 52. Overtime, allowances and the type of work you do lift real pay above the award. Refer to the Electricians (General, Commercial & Domestic) salary guide for figures from live adverts.

What you need

  • QualificationCertificate III in Electrotechnology Electrician (UEE30820) or an earlier equivalent on Energy Safe Victoria's accepted list, such as UEE30811.
  • Completed apprenticeshipA finished 4-year contract of training as an electrician, confirmed by a VRQA completion letter.
  • 12 months' installation workWritten confirmation from your employer of at least 12 months carrying out electrical installation work.
  • LEA passedTheory, Safe Working Practice and Practical, each passed at 75% or higher, at an Energy Safe approved venue and within 5 years of applying.
  • Application fee$471.50 for 2026–27, paid by credit card when you apply. $70 of that is a non-refundable administration charge.
  • CPD for renewalComplete Skills Maintenance training within the two years before each renewal. Electricians will need Skills Development training as well from 2028.

How to get there

  1. Year 1Sign a 4-year apprenticeshipTrain under a contract of training and enrol in the Certificate III in Electrotechnology Electrician with an RTO.
  2. Years 1-4Build installation hoursGet at least 12 months of electrical installation work during your apprenticeship, and make sure your employer will put it in writing.
  3. Year 4Get your LEA authorisationOnce you have finished all required units, your RTO issues the letter you need before you can book.
  4. Year 4Pass the 3 LEA assessmentsBook Theory, Safe Working Practice and Practical at an approved venue. You need 75% in each.
  5. End of Year 4Apply through ESVConnectUpload your Cert III, employer letter and three LEA results, enter your VRQA number and pay $471.50.
  6. Every 5 yearsRenew every 5 yearsComplete the required CPD and pay the $235.70 renewal fee.

Open now on ElectricalRoles.com.au

See all →

Questions people ask

Can I work as a contractor with just an A Grade licence in Victoria?

No. The A Grade licence covers installation work as an employee only. To contract for profit or reward you also need Registered Electrical Contractor (REC) registration with Energy Safe Victoria.

What happens if I fail part of the LEA?

You only resit the part you failed. Score 41% to 74% on the theory or practical, or fail Safe Working Practice, and you wait 14 days before your next attempt. A score of 40% or less, or six or more attempts at the same test, can mean conditions such as a review or extra training before you rebook.

How long are my LEA results valid?

You must apply for the licence within 5 years of completing the LEA. After that, the results no longer count towards an application.

How much does the Victorian electrical licence cost?

For 1 July 2026 to 30 June 2027 the Electrician's Licence (A) application fee is $471.50 and covers 5 years. Renewal is $235.70. The application fee includes a $70 administration component that is not refunded.

Do I need to do training to renew my licence?

Yes. All electrical licence renewals since 1 July 2023 require CPD. Electricians must finish Skills Maintenance within the two years before renewal, and from 2028 they will also need Skills Development.

Can an electrical fitter get an A Grade licence?

Yes, there is a separate pathway. You need a Supervised Worker's Licence, a completed 4-year electrical fitter contract of training, 12 months of installation work under that licence, and a pass in the LEA. Ask Energy Safe for an LEA authorisation letter before you book.

Sources

  1. Energy Safe Victoria: Electrician's licence (A Grade)
  2. Energy Safe Victoria: Undertaking the Licensed Electrician's Assessment
  3. Energy Safe Victoria: Electrical licensing fees
  4. Energy Safe Victoria: Electrical apprentices applying for a licence
  5. Energy Safe Victoria: CPD introduction
  6. Energy Safe Victoria: CPD for different licence classes

Electricians (General, Commercial & Domestic) jobs by city

Let employers come to you

Upload your CV and we build your profile from it. Employers contact you. Free for job seekers.

Create your profile
Free email alerts

Be the first to know.

New electrical jobs, employers and talent, straight to you as they go live. Stay in the loop.

Get the inside track →