electricalroles.com.auJoin

How can an overseas electrician work in Australia?

Short answer

Pass a Trades Recognition Australia skills assessment through the Offshore Skills Assessment Program and you get an Offshore Technical Skills Record (OTSR). With the OTSR you can apply for a provisional licence and work under supervision while you do gap training. After that you apply for a full state licence. NZ electricians go through mutual recognition.

Checked against 10 sources

Smiling migrant electrician in a sky blue shirt carrying a yellow tool bag through a sunny Australian housing estate
Assessing body
Trades Recognition Australia (TRA)
Program
OSAP, compulsory for electricians
OSAP cost
Up to $5,320 (Pathway 1)
Supervised period
About 12 months before full licence

Which TRA program applies to electricians?

Trades Recognition Australia runs several skills assessment programs, but only one fits a licensed electrician applying for permanent migration. The Offshore Skills Assessment Program (OSAP) is compulsory for Electrician (General) and Electrician (Special Class). The Job Ready Program is closed to electricians. It is meant for international students who finished an Australian VET course, and TRA lists electricians as ineligible. The general Migration Skills Assessment also excludes licensed electrical trades. If you are applying for a 482 visa, TRA runs a separate Temporary Skills Shortage assessment.

TRA only assesses people who need the result for a skilled visa application with the Department of Home Affairs. Before you pay anything, confirm with Home Affairs that your visa needs a skills assessment and that TRA is the assessing authority for your occupation.

How the offshore skills assessment works

OSAP has two pathways. Pathway 1 is for people without an Australian qualification, which covers most overseas tradies. Pathway 2 is for people who already hold a relevant Australian qualification or an unrestricted Australian licence. You choose a TRA-approved registered training organisation (RTO) from TRA's RTO Finder and send it your documentary evidence. A qualified Australian electrician then runs a technical interview with you.

Electricians on Pathway 1 must also do a practical assessment in person at an approved venue. The whole assessment is in English, and you cannot use an interpreter. TRA says the RTO will email your outcome about 15 weeks after you lodge complete documents. If you pass, you get a skilled migration outcome letter for your visa and an OTSR. The OTSR is your evidence for a provisional licence.

From OTSR to a full licence

The OTSR is not a licence. It records your skills against the Australian Certificate III, and you still need Australian context gap training plus a period of supervised work. You apply to the state or territory regulator for a provisional licence, permit or restricted licence, which lets you work under a fully licensed electrician while you train. The name and conditions change from state to state.

TRA names the gap course as 11297NAT Course in Electrician - Minimum Australian Context Gap. Once the training and supervised time are done, you can get the Certificate III in Electrotechnology Electrician and apply for the full licence. A worker's licence does not let you run your own business. A contractor licence generally needs extra training and experience.

UK, South African and New Zealand electricians

UK and South African electricians take the same OSAP route as everyone else. You can do the practical assessment close to home: TRA's RTO Finder lists approved venues in London, Lancashire, Cheshire and Hammersmith in England, and in Cape Town, Pretoria and Gauteng in South Africa. Their home licences give them no automatic standing here. South Australia, for example, says licences from countries other than New Zealand are generally not recognised.

New Zealand electricians skip the skills assessment. The Trans-Tasman Mutual Recognition Arrangement lets a current NZ licence holder apply for the equivalent Australian licence. Queensland goes further. A current NZ practising licence for a registered electrician lets you work there within its scope without getting a Queensland licence.

Pay

Award minimum, Electrical worker grade 5 (from 1 July 2026)
$58,193
Electrician, Australia (typical)
$117,700
Electrician, New South Wales
$118,400
Electrician, Victoria
$116,000
Electrician, Queensland
$116,400
Electrician, Western Australia
$128,800

AUD a year, before tax. The award row is the official minimum under the Electrical, Electronic and Communications Contracting Award 2020 (MA000025): $1,119.10 a week, or $29.45 an hour. The other rows are estimates based on ABS Employee Earnings and Hours (May 2025), moved forward to 2026 with a wage index, and the state figures are modelled. Overtime, site allowances and mining or FIFO work push actual earnings higher. While you are on a provisional licence, ask your employer which award classification applies to you. Refer to the Electricians (General, Commercial & Domestic) salary guide for figures from live adverts.

What you need

  • Skilled visa pathwayTRA only assesses people who need the result for a skilled migration visa with the Department of Home Affairs.
  • Work experienceYou must be working in the trade now or have worked in it recently, with proof of employment. The OSAP guidelines set out how much experience you need.
  • Current passportOSAP has a list of nominated countries. If your passport isn't on it, you can still be assessed as long as you can travel to an approved venue.
  • EnglishThe technical interview and the practical assessment are run in English. Interpreters are not allowed.
  • Practical assessmentElectricians on Pathway 1 must do a hands-on assessment in person at a listed venue.
  • Gap training and supervisionAfter the OTSR you complete Australian context gap training while you work under a fully licensed electrician.
  • Non-skill requirementsStates also check identity and whether you are fit and proper. WA, for example, asks for a police check dated within the last three months.

State by state

New South WalesWith an OTSR you apply online for a provisional tradesperson certificate. It is issued for one or three years and cannot be renewed. NZ licence holders can apply under the TTMRA.
VictoriaEnergy Safe Victoria accepts the OTSR for a Supervised Worker's Licence (L). For an A Grade licence you need at least 12 months under supervision, the gap training, a Certificate III, and 75% or better in both the LET and LEP assessments.
QueenslandOTSR holders get an electrical work training permit and complete the gap training with an RTO. You are eligible for the licence once the RTO confirms completion and you have done CPR and rescue training.
Western AustraliaWith an OTSR endorsed Electrician (General), apply for an Electrical Workers permit (Form R145) and complete the gap training. After that you can apply for the full electrician's licence.
South AustraliaOTSR holders apply for a restricted electrical licence and work under supervision. When the extra units listed on the OTSR are done, you apply to have the restriction removed.
TasmaniaThe electrical provisional licence is only for people arriving from overseas. It lasts 12 months and costs $294. You need your OTSR and proof that you have enrolled in gap training.
Northern TerritoryOverseas-trained electricians apply for an electrical work licence training permit, endorsed for unrestricted electrical work (trained overseas). The application must include a copy of the OTSR.

How to get there

  1. Before applyingConfirm your visa and programCheck with Home Affairs that your visa needs a TRA assessment. Licensed electricians go through OSAP, not the Job Ready Program.
  2. Month 1Choose an RTO and submit evidencePick a TRA-approved RTO from the RTO Finder. It tells you what documents to send for the documentary evidence stage.
  3. Months 2-5Technical interview and practicalAn Australian electrician interviews you and tests you hands-on at an approved venue. The outcome arrives about 15 weeks after your complete documents are lodged.
  4. After a passReceive OTSR and outcome letterUse the outcome letter for your visa application and the OTSR for your provisional licence.
  5. About 12 monthsProvisional licence and gap trainingWork under a fully licensed electrician while you complete the Australian context gap training.
  6. After gap trainingFull state licenceGet your Certificate III, pass any state assessments, and apply for the unrestricted licence.

Open now on ElectricalRoles.com.au

See all →

Questions people ask

Can I use the Job Ready Program as an electrician?

No. TRA lists Electrician (General and Special Class) as ineligible for the Job Ready Program. Licensed electricians applying for permanent migration have to go through the Offshore Skills Assessment Program.

How much does the OSAP skills assessment cost?

TRA's OSAP page gives a Pathway 1 total of up to $5,320: $1,120 for documentary evidence, $2,000 for the technical interview and $2,200 for the practical assessment. Pathway 2 comes to $2,020. Reviews and reassessments cost extra, and TRA says its fees can change.

Can I work as soon as I land with an OTSR?

Only after the state regulator grants your provisional licence, permit or restricted licence. Even then you must work under someone who holds a full electrician's licence while you complete gap training.

I'm a UK or South African electrician. Do I have to fly to Australia for the practical?

Not necessarily. TRA's RTO Finder lists approved practical assessment venues in England, including London, Lancashire and Cheshire, and in South Africa, including Cape Town, Pretoria and Gauteng.

Does a New Zealand electrician need a TRA assessment?

No. A current NZ electrical licence can be recognised under the Trans-Tasman Mutual Recognition Arrangement, and you apply to the state regulator for the equivalent licence. In Queensland, a current NZ registered electrician practising licence lets you work within its scope without a Queensland licence.

Will my licence let me run my own electrical business?

No. TRA notes that a worker's licence does not always let you become a contractor. Contractor licences generally need further training and more experience, and each state sets its own rules.

Sources

  1. Trades Recognition Australia: Offshore Skills Assessment Program
  2. Trades Recognition Australia: Pathway 1
  3. Trades Recognition Australia: Licensing
  4. Trades Recognition Australia: Job Ready Program
  5. Trades Recognition Australia: RTO Finder
  6. Energy Safe Victoria: International electrical workers
  7. NSW Government: Overseas qualifications for building and trade licences
  8. WorkSafe Queensland: Overseas applicants
  9. WA Government: Qualifications gained outside Western Australia
  10. Service Tasmania: Electrical provisional licence

Electricians (General, Commercial & Domestic) jobs by city

Let employers come to you

Upload your CV and we build your profile from it. Employers contact you. Free for job seekers.

Create your profile
Free email alerts

Be the first to know.

New electrical jobs, employers and talent, straight to you as they go live. Stay in the loop.

Get the inside track →