electricalroles.com.auJoin

How do you get an electrical licence in the Northern Territory?

Short answer

To get an unrestricted electrical work licence in the NT, you finish a Certificate III in Electrotechnology Electrician through an NT apprenticeship, including at least 12 months of electrical mechanic trade work. You then apply to the Electrical Safety Regulator at NT WorkSafe. The fee is $521 and the licence lasts five years.

Checked against 6 sources

Aboriginal Australian electrician in orange smiling beside a solar pump shed on red earth in the Territory
Regulator
Electrical Safety Regulator, NT WorkSafe
Worker licence fee
$521, valid 5 years
Contractor licence
$521 to $1,169, 1 to 3 years
Qualification
Cert III Electrotechnology Electrician

Who issues electrical licences in the NT now?

The Electrical Workers and Contractors Licensing Board no longer exists. The Electrical Safety Act 2022 and Electrical Safety Regulations 2024 took effect on 1 July 2024. They abolished the Board and moved licensing to the Electrical Safety Regulator within NT WorkSafe. If you have an older licence issued under the 1978 Act, it stays valid until the expiry date printed on it. After that you apply to the Regulator for a new licence.

Every application, renewal or change has to go on an NT WorkSafe approved form. The old Board forms have not been accepted since 1 July 2024. The new laws also brought in new licence classes and endorsements so the NT lines up more closely with the other states.

Which electrical work licence do you need?

Anyone who does or supervises electrical work needs an electrical work licence, and only an individual can hold one. There are two classes, unrestricted and restricted. The unrestricted electrical mechanic licence replaces the old electrical mechanic grade A. It covers installing or altering installations and electric lines, plus maintaining, repairing and connecting equipment.

The unrestricted electrical mechanic and fitter licence is new. On top of mechanic work, it lets you make, operate, test and repair electrical equipment. You need 12 months of mechanic trade work and 12 months of fitter trade work during your NT apprenticeship. If you already hold a mechanic licence, you can upgrade by passing an approved exam or showing 12 months of fitter experience.

Restricted licences cover only the work endorsed on them, and none of them allow installation work. Endorsements cover trades such as air-conditioning and refrigeration, cable jointing, line work, instrumentation, fire protection, gas and plumbing.

What does it take to run your own electrical business?

A business needs an electrical contractor licence if it does electrical work for a fee or employs licensed workers who do. A sole trader, partnership or company can hold one, for up to three years. You need at least two years on an unrestricted licence. You also need the contractor course units UEEEL0040 and UEEEL0002, and at least $5,000,000 of public and products liability insurance.

Every contractor licence names at least one nominated person. That person has done the contractor course and held an unrestricted licence for two years or more, and all the business's electrical work has to be done or supervised by them. One person can be nominee for only one contractor at a time. If the business loses its nominee, it has 30 days to tell the Regulator, and the licence is suspended until a new nominee is approved.

Working remotely or coming from interstate

Much NT work is on remote sites, mines and communities, and a lot of it goes to tradespeople who fly in from other states. Since 1 July 2022, automatic mutual recognition has let licensed interstate workers do the same work in the NT. You lodge a free notification with NT WorkSafe and do not need a separate NT licence.

There is a catch if you move here. Once the NT is your main place of residence, you can no longer use automatic mutual recognition. You must apply for an NT licence through the mutual recognition process and show you are still competent. Companies and partnerships cannot use automatic mutual recognition at all. Only sole traders can use it for contractor work.

Pay

Electrician, Northern Territory (modelled)
$121,000
Electrician, Australia (modelled)
$117,700
Award minimum, Electrical worker grade 5
$58,193
Award apprentice, year 1
$29,097
Award apprentice, year 2
$34,916
Award apprentice, year 3
$40,735
Award apprentice, year 4
$47,718

AUD a year, before tax. The electrician figures are estimates based on ABS Employee Earnings and Hours, May 2025, indexed to 2026. The NT figure is modelled and is not an official rate. Award minimums come from the Electrical, Electronic and Communications Contracting Award 2020 (MA000025), effective 1 July 2026, with apprentice weekly rates multiplied by 52. Overtime, remote allowances and FIFO rosters can push real earnings well above these figures. Refer to the Electricians (General, Commercial & Domestic) salary guide for figures from live adverts.

What you need

  • QualificationCertificate III in Electrotechnology Electrician, completed through an apprenticeship in the NT under the Training and Skills Development Act 2016.
  • Trade experienceAt least 12 months of electrical mechanic trade work during your apprenticeship. The mechanic and fitter licence also needs 12 months of fitter work.
  • Apprentice registrationRegistering an apprentice with NT WorkSafe costs $74. A trainee permit also costs $74.
  • Licence fee$521 to apply for or renew an unrestricted or restricted electrical work licence, at fees effective from 1 July 2026. GST does not apply.
  • Overseas trainedYou need relevant overseas training with 12 months of trade experience, plus an Offshore Technical Skills Record from Trades Recognition Australia for 34111 Electrician (General). You can only get the mechanic licence, not the mechanic and fitter licence.
  • Contractor licenceTwo years on an unrestricted licence, UEEEL0040 and UEEEL0002, and $5 million in public and products liability insurance. Fees are $521 for one year, $894 for two and $1,169 for three.

How to get there

  1. Year 0Start an NT apprenticeshipSign on with an employer and enrol in the Certificate III in Electrotechnology Electrician. Your apprenticeship is registered with NT WorkSafe for a $74 fee.
  2. During your apprenticeshipBuild trade experienceGet at least 12 months of electrical mechanic work during your apprenticeship. Add 12 months of fitter work if you want the mechanic and fitter licence.
  3. When your apprenticeship endsApply for your licenceSend the Application for unrestricted electrical work licence form to the Electrical Safety Regulator with the $521 fee.
  4. Every 5 yearsRenew every five yearsElectrical work licences last five years. Renewal costs another $521.
  5. Two years after you are first licensedGo contractingAfter two years on an unrestricted licence, finish the contractor course, take out $5 million of liability insurance and apply for a contractor licence.

Open now on ElectricalRoles.com.au

See all →

Questions people ask

Does the Electrical Workers and Contractors Licensing Board still issue NT licences?

No. The Board was abolished on 1 July 2024 when the Electrical Safety Act 2022 took effect. The Electrical Safety Regulator within NT WorkSafe now handles all electrical licensing.

How much is an NT electrical licence?

An unrestricted or restricted electrical work licence costs $521 to apply for or renew, at fees effective from 1 July 2026. The licence lasts five years. GST does not apply.

Can I work in the NT on my interstate licence?

Yes, if you live elsewhere. Under automatic mutual recognition you lodge a free notification with NT WorkSafe and can then do the work your home licence covers. Once the NT becomes your main residence, you have to apply for an NT licence through mutual recognition instead.

Is my old NT electrical mechanic licence still valid?

Yes, until the expiry date printed on it. When it runs out, you apply to the Electrical Safety Regulator for a new licence. The old grade A licence is equivalent to the unrestricted electrical mechanic licence.

What is the difference between the mechanic and the mechanic and fitter licence?

The mechanic licence covers installing, altering, maintaining and connecting electrical installations and equipment. The mechanic and fitter licence covers all of that plus making, operating, testing and repairing electrical equipment. It needs 12 months of fitter experience on top of the mechanic experience.

How long does an NT electrical contractor licence last?

You can get one for one, two or three years. The fees are $521, $894 and $1,169. The licence must always have an approved nominated person on it.

Sources

  1. NT WorkSafe: Electrical licensing
  2. NT WorkSafe: Electrical work licenses and endorsements
  3. NT WorkSafe: Electrical contractor licence
  4. NT WorkSafe: Licensing fees and charges
  5. NT WorkSafe: Application for unrestricted electrical work licence
  6. Fair Work Ombudsman: Electrical, Electronic and Communications Contracting Award 2020

Electricians (General, Commercial & Domestic) jobs by city

Let employers come to you

Upload your CV and we build your profile from it. Employers contact you. Free for job seekers.

Create your profile
Free email alerts

Be the first to know.

New electrical jobs, employers and talent, straight to you as they go live. Stay in the loop.

Get the inside track →