Registration or licence: which one do you need?
South Australia splits electrical work into two permissions, both issued by Consumer and Business Services under the Plumbers, Gas Fitters and Electricians Act 1995. A worker registration lets you do the work with your own hands. A contractor's licence lets you contract or subcontract for it. Most tradies running their own show hold both.
A contractor's licence on its own does not let you pick up the tools. CBS says the licence holder must also be registered as a worker, or must engage someone who is. If you run the business as a partnership, every active partner needs a licence.
What qualification gets you a full registration?
Your qualifications decide what work your registration covers. For an unrestricted registration, CBS accepts a completed Australian electrical trade apprenticeship that includes an eligible Certificate III. It also accepts an eligible Certificate III issued on or before January 2016, or the interstate equivalent. A later Certificate III without a completed apprenticeship does not qualify on its own. An unrestricted registration covers all electrical work, including certifying work and giving technical direction.
Narrower registrations exist for refrigeration and air conditioning, instrumentation, disconnect and reconnect work, water heaters, linework and cable jointing. A restricted registration under the National Restricted Electrical Licence lets you disconnect and reconnect existing fixed wired equipment up to 1000 volts. It does not cover installation, fault finding, rewiring or alterations.
Apprentices, interstate and overseas electricians
Apprentices need a photo registration card as well. Once your training contract is approved, CBS emails or texts you a link to upload a photo and 100 points of ID, then posts the card out. There is no fee for it. If you work unregistered, both you and your employer can face significant penalties.
If you live in another state, you can work in SA on your home licence under Automatic Mutual Recognition. If you move here to live, you need an SA licence, which you can apply for through mutual recognition. A new worker registration costs $479.50 when your interstate or NZ licence is recognised. Overseas-trained electricians start on a restricted registration, work under supervision, complete the 11297NAT gap training, get their Certificate III, and then apply for full registration.
What the contractor's licence asks of you
To get a contractor's licence you need at least $10,000 in net assets. If you fall short, you can apply for a restricted licence as a subcontractor. You also need a National Police Certificate no more than 12 months old, a photo and an ID check. You must also meet the CBS business criteria. A new combined worker registration and contractor licence costs $1,396.
You can meet the business criteria several ways. You might already hold an equivalent licence, have completed approved business units such as BSBOPS601, or hold a business, economics or accounting degree or diploma. A Certificate IV in Building with an academic record also counts. Once licensed, your licence number has to appear in all public advertising, including your vehicle and website.
Pay
AUD a year, before tax. Modelled figures come from ABS Employee Earnings and Hours, May 2025, moved to 2026 with a wage index. State figures are modelled estimates. Award minimums are from the Electrical, Electronic and Communications Contracting Award 2020 (MA000025), effective 1 July 2026. Overtime, allowances, FIFO and industrial work push actual earnings above the award. Refer to the Electricians (General, Commercial & Domestic) salary guide for figures from live adverts.
What you need
- QualificationFor an unrestricted registration you need a completed Australian electrical trade apprenticeship that includes an eligible Certificate III, or an eligible Certificate III issued on or before January 2016 (or the interstate equivalent). Restricted registrations need the matching qualification for that scope.
- Worker registrationYou need this to physically do electrical work in SA. A new registration costs $617 ($479.50 if your interstate or NZ licence is recognised in SA), then you renew it every three years for $342.
- National Police CertificateApplicants need a certificate no more than 12 months old, from SA Police or an ACIC-accredited checking service. Some exemptions apply, such as having lodged one with CBS in the past year.
- Photo and IDYou supply a photo and supporting documents with the application. Every registered worker, apprentices included, carries a photo registration card.
- Contractor's licenceThis is required to contract or subcontract for electrical work. A new licence costs $779 for an individual ($641.50 if your interstate or NZ licence is recognised) or $1,012 for a company. Renewal costs $504 (individual) or $737 (company) every 12 months.
- Net assets and business criteriaContractors need at least $10,000 in net assets and must meet the CBS business knowledge criteria. Companies must show that a director meets the criteria.
- Certificates of complianceCompleted electrical work must be certified by the contractor or the worker through the electronic certificate of compliance (eCoC) system.
How to get there
- StartSign a training contractStart an electrical apprenticeship with an employer. Once the contract is approved, CBS sends you a link to register as an apprentice at no cost.
- During apprenticeshipWork under supervisionApprentice registration covers electrical work only while you are under a training contract and supervised by a registered electrician qualified to supervise apprentices.
- End of apprenticeshipFinish your qualificationComplete the Australian electrical trade apprenticeship, including its eligible Certificate III. This is what CBS assesses for an unrestricted registration.
- Once qualifiedApply for worker registrationFill in the online form, then print, sign, scan and upload it with your documents, photo and police certificate. Pay the $617 application fee. Renewal costs $342 every three years.
- When going out on your ownAdd a contractor's licenceIf you want to quote and contract for work, show $10,000 in net assets, meet the business criteria and pay the $779 new individual licence fee.
- OngoingKeep it currentRenew your registration every three years for $342 and your contractor's licence every 12 months for $504 (individual). Tell CBS about changes such as a new address or an offence within 14 days.
Open now on ElectricalRoles.com.au
Questions people ask
Who issues electrical licences in South Australia?
Consumer and Business Services (CBS) issues electrical worker registrations and electrical contractor licences in SA. Both fall under the Plumbers, Gas Fitters and Electricians Act 1995.
How much does an electrical registration cost in SA?
A new worker registration costs $617 ($479.50 if your interstate or NZ licence is recognised in SA), then $342 to renew every three years. A new contractor's licence costs $779 for an individual or $1,012 for a company, with renewal at $504 or $737 every 12 months. A new combined worker registration and contractor licence costs $1,396.
Can I contract for work with only a worker registration?
No. To contract or subcontract for electrical work you need a contractor's licence, or a building work contractor's licence that covers electrical work. The contractor's licence does not let you do the work yourself, so you need a worker registration as well.
Do apprentices need to be registered in SA?
Yes. Every electrical worker needs a photo registration card, apprentices included. CBS contacts you once your training contract is approved, and there is no fee for apprentice registration.
Can I work in SA on an interstate electrical licence?
If your home is in another state or territory, you can work in SA under Automatic Mutual Recognition. If you move your main residence to SA, you need an SA registration, which you can apply for through mutual recognition.
What if I don't have $10,000 in net assets?
You cannot get a full contractor's licence without it. CBS says you can apply for a restricted licence as a subcontractor instead.
Sources
- SA.GOV.AU: Plumbing, gas fitting and electrical registration and contractors' licences
- SA.GOV.AU: Renew an occupational licence or registration (fees)
- CBS: Electrical qualifications guidelines
- CBS: Licence categories, electricians
- CBS: Working as an electrician in SA, interstate workers
- CBS: Business criteria for contractors
- ABLIS: Plumbing, Gas Fitting or Electrical Contractors Licence, SA
- Trades Recognition Australia: Electrician (General and Special Class)
- Fair Work Ombudsman: Electrical, Electronic and Communications Contracting Award 2020



