What open registration lets you do
Communications cabling in homes and businesses is regulated nationally by the Australian Communications and Media Authority (ACMA) under the Telecommunications (Cabling Provider) Rules 2025. These replaced the 2014 rules on 31 March 2025. Phone, data, fire and security cabling all have to be done by a registered cabler. An unregistered worker can only do the work under the direct supervision of a registered cabler.
Open is the broadest of the three registrations. It covers cabling in homes, businesses and commercial buildings where the cabling ends at the network boundary on a socket, a network termination device or a main distribution frame. A registered cabler cannot work on cabling owned by a carrier or NBN. All work must comply with AS/CA S009:2020, the Wiring Rules, and you have to give the customer a written statement certifying the work.
Open versus restricted registration
Restricted registration is aimed at domestic and small business work. It covers cabling that ends at a socket or network termination device, such as extra phone points or cabling behind an alarm panel or modem. A restricted cabler cannot work on cabling that ends at a main distribution frame, a jumperable distributor or frame, or a patch panel. They also cannot work on cable that shares a sheath with other services, or on cable run on electricity distribution poles.
For restricted registration you need 80 hours of experience and a 30-question test. If you apply for open registration with only 80 hours, the registrar can register you as restricted first. Once you log another 280 hours on the job, you can apply again for open. Lift registration is a third, separate category, and you need an electrical trade qualification before you can get it.
Specialised cabling competencies
Endorsements are now called additional competencies. With open registration you can add six kinds of specialised cabling: broadband, structured (such as Cat 5 and Cat 6 data cable, or cabling for building management systems), optical fibre, coaxial, aerial and underground. A restricted cabler can only add broadband, aerial and underground.
You only need a competency for work you actually do. If you run Cat 6 to a patch panel, you need the structured competency. Fibre work needs the optical fibre competency. After you finish the extra training with a registered training organisation (RTO), send your registrar proof and they will add the competency to your registration. You use the same process to move from restricted to open.
Choosing a registrar
The ACMA does not issue registrations itself. Four registrars do it on its behalf: the Australian Cabler Registration Service (ACRS), the Australian Security Industry Association Limited (ASIAL), Fire Protection Association Australia (FPA Australia) and TITAB Australia Cabler Registry Services. You can use any of them, wherever you live. Fees and services vary between them, so compare before you apply. BICSI Registered Cablers Australia has stopped issuing and renewing registrations. Its cablers stay registered until their current registration expires and then must move to another registrar.
You must tell your registrar about a change of contact details within 21 days. If you don't follow the conditions of your registration, you can be fined.
Pay
AUD a year, before tax. Refer to the Data Cabling & Communications salary guide for figures from live adverts.
What you need
- Approved trainingYou need a qualification or units of competency from the ICT or Electrotechnology training package that ACMA lists for open registration. One option is the ICTSS00084 Basic Open Cabler Registration Skill Set.
- 360 hours of experienceThe 360 hours must be real on-the-job cabling, on top of anything you did during training. Work experience in school-based programs does not count.
- Cabling regulations testAn RTO runs a 50-question written test on ACMA rules. You need at least 80 per cent to pass.
- Evidence of experienceYou can show a recognised trade qualification that involves cabling, such as a licensed electrician or telecommunications technician. A statutory declaration detailing your experience is also accepted.
- Specialised competenciesStructured, optical fibre, coaxial, broadband, aerial and underground work each need extra training. You only need the ones that match the work you do.
- EligibilityOnly individuals can be registered. You cannot be registered while your cabling registration is suspended.
How to get there
- Before trainingPick the registrationChoose open if you'll work on commercial sites, patch panels or MDFs. Choose restricted for basic domestic phone and alarm work.
- Weeks 1-4Complete RTO trainingComplete an open cabler skill set or a qualification that ACMA accepts. Electricians and ICT certificate holders can take mapped pathways.
- End of trainingPass the rules testScore at least 80 per cent on the 50-question cabling regulations test run by the RTO.
- Months 1-6Log 360 hoursWork on the tools under a registered cabler's direct supervision. You can hold restricted registration once you have 80 hours.
- Once eligibleApply to a registrarSend ACRS, ASIAL, FPA Australia or TITAB your certificates, test result and evidence of experience.
- As work demandsAdd competenciesComplete structured, fibre or other specialised training, then ask your registrar to add each competency.
Questions people ask
Do electricians need a separate cabling registration?
Yes. A state electrical licence does not cover communications cabling, so you need ACMA cabling registration for data, phone, fire and security cabling. Holding an electrician's licence can count as evidence of your cabling experience when you apply.
Can I work on data cabling before I'm registered?
Yes, as long as a registered cabler directly supervises you the whole time. That cabler has to make sure the work meets the Wiring Rules and must certify it in writing.
Is cabling registration national or state-based?
It's national. The ACMA rules apply in every state and territory, and you can register with any of the 4 authorised registrars no matter where you live.
Do I need the structured competency to install Cat 6?
Yes, structured cabling such as Cat 5 and Cat 6 data cable is specialised cabling. You need open registration with the structured competency added before you can do or supervise that work.
How do I upgrade from restricted to open?
Finish the open training, pass the 50-question test and build up 360 hours of experience in total. Then send your registrar the proof and they will change your registration to open.
What changed with the 2025 rules?
The Telecommunications (Cabling Provider) Rules 2025 took effect on 31 March 2025. They clarified the three registration categories, the rules for specialised cabling and the requirements for certifying work.
Sources
- ACMA: Categories of cabling registration
- ACMA: Contact a cabling registrar
- ACMA: Pathways to cabling registration (April 2025)
- Federal Register of Legislation: Telecommunications (Cabling Provider) Rules 2025
- ACMA: Cabling Provider Rules
- ACMA: Change or renew your cabling registration
- ACMA: Remake of the Cabling Provider Rules 2014
- ACMA: Find a registered cabler
- Fair Work Ombudsman: Electrical, Electronic and Communications Contracting Award 2020



