What does a marine electrician actually do?
You work on anything electrical that floats or ties up to a wharf. On recreational boats that means shore power inlets, battery banks, chargers, inverters, navigation lights and switchboards. On commercial vessels and warships the systems get bigger: generators, distribution boards, motors and control gear. You also wire and maintain the marina side, meaning the pedestals and supply that feed boats at their berths.
Much of the job is fault-finding. Salt air, damp and vibration break down connections faster than on land, so you will spend a lot of time tracing corrosion, chafed cable and earthing faults in tight spaces below deck.
Which standards and voltage rules apply on boats?
The wiring rules, AS/NZS 3000, send marina and recreational boat work to AS/NZS 3004. That standard has two parts. Part 1 covers marinas supplied at low voltage AC. Part 2 covers the design, construction and installation of electrical systems in boats up to 50 metres long, used on inland waters or at sea. Commercial vessels have their own standard, the National Standard for Commercial Vessels Part C Subsection 5B, which adjusts AS/NZS 3000 for the marine environment.
Voltage decides who can touch what. Queensland's definitions are a good example. Extra-low voltage is 50 V AC or less, or 120 V ripple-free DC or less. Work above that is electrical work and needs a licence. So does extra-low voltage work in hazardous locations and work on cathodic protection systems. Mains voltage on a boat, meaning 230 V or 240 V, is licensed work.
Who hires marine electricians?
Boatyards, marinas, boat builders and vessel repairers take on most of the small-craft work. Defence shipbuilding is the large-scale end. In February 2024 the federal government confirmed the Osborne shipyard in Adelaide will build six Hunter class frigates, the last due to the Navy by 2043. The same yard has SSN AUKUS submarine construction, a replacement for the Hobart class destroyers, upgrades to the current destroyers, and Collins class sustainment and life extension lined up.
When that program was announced, the government said the frigates would keep at least 2000 jobs going and create at least 500 more. It put submarine construction at more than 4000 direct jobs on top of that. BAE Systems Australia runs the frigate program.
How do you get into it?
Start with an electrical apprenticeship, ideally with an employer that does marine work. TAFE NSW's UEE30820 program includes an elective unit, UEEEL0053, on maintaining electrical marine equipment and systems, so ask your RTO whether it offers that unit. In Victoria the apprenticeship is a four-year contract of training and must include at least 12 months of electrical installation work. Once you finish and pass the licence assessments, you have a full licence. After that, marine experience is what lifts you above general electricians when you apply for boatyard and shipyard jobs.
Pay
AUD a year, before tax. Typical figures are modelled from ABS Employee Earnings and Hours, May 2025, moved to 2026 with a wage index; state figures are modelled. Award rows are the official minimums under MA000025 from 1 July 2026. Overtime, shift work, allowances and defence projects move actual earnings. Refer to the Industrial & Mining Electricians salary guide for figures from live adverts.
What you need
- Electrician's licenceLow voltage work on boats is electrical work, so it needs a licensed electrician. In Queensland, maintenance and repairs to a boat's low voltage installation are licensed work too.
- Certificate III qualificationUEE30820 Certificate III in Electrotechnology Electrician. For a full licence, the qualification is normally completed as an apprenticeship. In Victoria it must be done as an apprenticeship.
- ApprenticeshipFour years full time. In Victoria it can run up to six years part time and must include at least 12 months of installation work.
- Marine standards knowledgeAS/NZS 3004.1 covers marinas and AS/NZS 3004.2 covers boats up to 50 m. Commercial vessels follow NSCV Part C Subsection 5B.
- Contractor licence for private workIn Queensland, boat owners must use an electrical contractor for any 230 V or 240 V work, so you need a contractor licence to take on that work yourself.
- Marine site inductionTAFE NSW notes that many marinas, boatyards and marine worksites may ask for a marine card showing you understand marine workplace safety.
State by state
| Queensland | Boat electrical work falls under the Electrical Safety Act 2002 and must meet AS/NZS 3000, which points to AS/NZS 3004. Owners must hire an electrical contractor for any mains voltage work on their boats. |
|---|---|
| Victoria | To work as a qualified electrician you need an A Grade licence from Energy Safe Victoria. You get it after a four-year apprenticeship and passing the licence assessments, including Safe Working Practice. |
| South Australia | Completing UEE30820 makes you eligible for Unrestricted, Unsupervised Electrical Workers Registration. |
| Western Australia | AS/NZS 3004 is listed as the applicable standard for designing, building and installing marina electrical installations and recreational boat electrical systems. |
How to get there
- StartLand a marine-friendly apprenticeshipLook for a boatyard, vessel repairer, marine electrical contractor or shipbuilder that takes apprentices.
- Years 1-4Complete UEE30820Do your trade school blocks alongside on-the-job work. Ask your RTO for the marine equipment elective, UEEEL0053.
- End of year 4Get your licencePass your state's licence assessments and apply to the electrical regulator for a full electrician's licence.
- Years 5-7Build marine experienceWork on shore power, battery systems and vessel switchboards to AS/NZS 3004 and the commercial vessel standard.
- Year 6 onwardMove into shipbuilding or contractingApply for naval shipyard roles, or get a contractor licence and take on private boat work yourself.
Questions people ask
Can I do 12 V or 24 V boat wiring without a licence?
In Queensland, licensed electrical work starts above extra-low voltage, which is 50 V AC or 120 V ripple-free DC. So most 12 V and 24 V DC work falls outside it. The exceptions are extra-low voltage work in hazardous locations and work on cathodic protection, which still need a licence.
Is there a separate marine electrical licence?
None of the sources reviewed for this guide describe a separate marine licence. Marine electricians hold the same electrician's licence as anyone else in their state and specialise through experience and marine standards. Queensland requires low voltage boat work to be done by a licensed electrician.
What standard covers shore power at marinas?
AS/NZS 3004.1 covers marina electrical installations supplied at low voltage AC. AS/NZS 3004.2 covers the boat side, for vessels up to 50 metres. The wiring rules point to AS/NZS 3004 for this work.
Do imported boats meet Australian rules?
Imported boats built to IEC or ISO standards or classification society rules generally meet the fundamental safety section of AS/NZS 3000. Conflicts still come up, such as the cable colours on American-built boats. In Queensland these are resolved case by case.
How much does a marine electrician earn?
The modelled typical figure for this kind of electrician is about $117,700 a year nationally and about $128,800 in Western Australia. The award minimum for an electrical worker grade 5 is $1,119.10 a week from 1 July 2026. Overtime, shift work and defence projects can push earnings above that figure.
Sources
- Maritime Safety Queensland: Queensland regulated ships, electrical standards and licences
- ABLIS: AS/NZS 3004 Electrical installations, marinas and recreational boats (WA)
- TAFE NSW: Certificate III in Electrotechnology Electrician UEE30820
- TAFE NSW: Certificate III in Marine Mechanical Technology
- Skills Victoria: Certificate III in Electrotechnology Electrician
- Apprenticeships Victoria: Electrotechnology Electrician apprenticeship
- Energy Safe Victoria: About electrical apprenticeships
- Skills SA My Training: UEE30820
- WE ARE.SA: Commitment to continuous shipbuilding secures jobs
- Fair Work Ombudsman: Electrical, Electronic and Communications Contracting Award 2020



